specviewer.org TS 38.331 ASN.1 index CLI-RSSI-MeasResource-r19

CLI-RSSI-MeasResource (CLI-RSSI-MeasResource-r19)

RRC IE · TS 38.331 v19.4.0 (2026-09) · clause 6.3.2

CLI-RSSI-MeasResource-r19 is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.

First seen v19.0.0 (2025-10) · Not changed since

Definition

The IE CLI-RSSI-MeasResource is used to configure CLI-RSSI measurement resource which the UE may be configured to measure L1 CLI-RSSI.

CLI-RSSI-MeasResource-r19 ::=                 SEQUENCE {
    cli-RSSI-MeasResourceId-r19                   CLI-RSSI-MeasResourceId-r19                                  OPTIONAL,   -- Need R
    startSymbol-r19                               INTEGER (0..13)                                              OPTIONAL,   -- Need R
    nrofSymbols-r19                               INTEGER (1..14)                                              OPTIONAL,   -- Need R
    startPRB-r19                                  INTEGER (0..maxNrofPhysicalResourceBlocks-1)                 OPTIONAL,   -- Need R
    nrofPRBs-r19                                  INTEGER (1..maxNrofPhysicalResourceBlocks)                   OPTIONAL,   -- Need R
    cli-RSSI-PeriodicityAndOffset-r19             CSI-ReportPeriodicityAndOffset                               OPTIONAL,   -- Need R
    qcl-InfoPeriodic-CLI-RSSI-MeasResource-r19    TCI-StateId                                                  OPTIONAL,   -- Need R
    ...
}

Fields (7)

FieldDescription
cli-RSSI-MeasResourceId-r19
CLI-RSSI-MeasResourceId-r19 · OPTIONAL Need R
Identifies a CLI-RSSI measurement resource.
startSymbol-r19
INTEGER (0..13) · OPTIONAL Need R
Indicates the starting symbol of the CLI-RSSI-MeasurementResource within a slot
nrofSymbols-r19
INTEGER (1..14) · OPTIONAL Need R
Indicates the number of symbols for L1 CLI-RSSI measurement within a slot.
startPRB-r19
INTEGER (0..maxNrofPhysicalResourceBlocks-1) · OPTIONAL Need R
Indicates the starting PRB index of the measurement bandwidth.
nrofPRBs-r19
INTEGER (1..maxNrofPhysicalResourceBlocks) · OPTIONAL Need R
Indicates the allowed size of the BW for L1 CLI-RSSI measurement.
cli-RSSI-PeriodicityAndOffset-r19
CSI-ReportPeriodicityAndOffset · OPTIONAL Need R
Indicates the periodicity and slot offset for this CLI-RSSI-MeasResource , with the same value range as CSI-ResourcePeriodicityAndOffset.
qcl-InfoPeriodic-CLI-RSSI-MeasResource-r19
TCI-StateId · OPTIONAL Need R
Indicates a reference to one TCI-State in TCI-States for providing the QCL source and QCL type for a target periodic CLI-RSSI-MeasResource

Used by (1)

Uses (5)

In the viewer