CSI-AssociatedReportConfigInfo
CSI-AssociatedReportConfigInfo is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.
Definition
CSI-AssociatedReportConfigInfo ::= SEQUENCE {
reportConfigId CSI-ReportConfigId,
resourcesForChannel CHOICE {
nzp-CSI-RS SEQUENCE {
resourceSet INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig),
qcl-info SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId
OPTIONAL -- Cond Aperiodic
},
csi-SSB-ResourceSet INTEGER (1..maxNrofCSI-SSB-ResourceSetsPerConfig)
},
csi-IM-ResourcesForInterference INTEGER(1..maxNrofCSI-IM-ResourceSetsPerConfig) OPTIONAL, -- Cond CSI-IM-ForInterference
nzp-CSI-RS-ResourcesForInterference INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) OPTIONAL, -- Cond NZP-CSI-RS-ForInterference
...,
[[
resourcesForChannel2-r17 CHOICE {
nzp-CSI-RS2-r17 SEQUENCE {
resourceSet2-r17 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig),
qcl-info2-r17 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId
OPTIONAL -- Cond Aperiodic
},
csi-SSB-ResourceSet2-r17 INTEGER (1..maxNrofCSI-SSB-ResourceSetsPerConfigExt)
} OPTIONAL, -- Need R
csi-SSB-ResourceSetExt INTEGER (1..maxNrofCSI-SSB-ResourceSetsPerConfigExt) OPTIONAL -- Need R
]],
[[
resourcesForChannelTDCP-r18 SEQUENCE {
resourceSet2TDCP-r18 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig),
resourceSet3TDCP-r18 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) OPTIONAL -- Need R
} OPTIONAL, -- Cond TDCP
applyIndicatedTCI-State-r18 CHOICE {
perSet-r18 ENUMERATED {first, second},
perResource-r18 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF ENUMERATED {first, second}
} OPTIONAL, -- Cond ApplyIndicatedTCI
applyIndicatedTCI-State2-r18 CHOICE {
perSet-r18 ENUMERATED {first, second},
perResource-r18 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF ENUMERATED {first, second}
} OPTIONAL, -- Cond SecondCSICMR
csi-ReportSubConfigTriggerList-r18 CSI-ReportSubConfigTriggerList-r18 OPTIONAL -- Need R
]],
[[
resourcesForChannelCLI-r19 SEQUENCE {
resourceSetCLI-r19 INTEGER (1..maxNrofCLI-MeasResourceSetsPerConfig-r19) OPTIONAL, -- Need R
qcl-infoCLI-r19 SEQUENCE (SIZE(1..maxNrofCLI-MeasResourceSetsPerConfig-r19)) OF TCI-StateId OPTIONAL -- Need R
} OPTIONAL, -- Need R
resourcesForChannelCJTC-r19 SEQUENCE {
nzp-CSI-RS2-r19 SEQUENCE {
resourceSet2CJTC-r19 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig),
qcl-info2CJTC-r19 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId
OPTIONAL -- Need R
},
nzp-CSI-RS3-r19 SEQUENCE {
resourceSet3CJTC-r19 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig),
qcl-info3CJTC-r19 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId
OPTIONAL -- Need R
} OPTIONAL, -- Need R
nzp-CSI-RS4-r19 SEQUENCE {
resourceSet4CJTC-r19 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig),
qcl-info4CJTC-r19 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId
OPTIONAL -- Need R
} OPTIONAL -- Need R
} OPTIONAL, -- Cond CJTC
mr-SelectedResources-r19 SEQUENCE {
firstSelectedResource-r19 INTEGER (1..8),
secondSelectedResource-r19 INTEGER (1..8) OPTIONAL -- Need R
} OPTIONAL -- Need R
]]
}Candidate change requests of v19.1.0
The CRs whose title or cover names this change, strong and likely matches only.
- CR 5499 r3 (strong): Corrections to WI SBFD
Fields (40)
| Field | Description |
|---|---|
| reportConfigId CSI-ReportConfigId | The reportConfigId of one of the CSI-ReportConfigToAddMod configured in CSI-MeasConfig . |
| resourcesForChannel CHOICE { | |
| nzp-CSI-RS SEQUENCE { | |
| resourceSet INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) | , resourceSet2 NZP-CSI-RS-ResourceSet for channel measurements. Entry number in nzp-CSI-RS-ResourceSetList in the CSI-ResourceConfig indicated by resourcesForChannelMeasurement in the CSI-ReportConfig indicated by r eportConfigId above (value 1 corresponds to the first entry, value 2 to the second entry, and so on). |
| qcl-info SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId · OPTIONAL Cond Aperiodic | Fields qcl-Info and qcl-Info2 are lists of references to TCI-States for providing the QCL source and QCL type for each NZP-CSI-RS-Resource listed in nzp-CSI-RS-Resources of the NZP-CSI-RS-ResourceSet , indicated by resourceSet within nzp-CSI-RS and by resourceSet2 within nzp-CSI-RS2 , respectively. Each TCI-StateId refers to the TCI-State which has this value for tci-StateId and is defined in tci-StatesToAddModList or in dl-OrJointTCI-StateList in the PDSCH-Config included in the BWP-Downlink corresponding to the serving cell and to the DL BWP to which the resourcesForChannelMeasuremen t (in the CSI-ReportConfig indicated by reportConfigId above) belong to. First entry in qcl-info/qcl-info2 corresponds to first entry in nzp-CSI-RS-Resources of that NZP-CSI-RS-ResourceSet , second entry in qcl-info/qcl-info2 corresponds to second entry in nzp-CSI-RS-Resources , and so on (see TS 38.214 [19], clause 5.2.1.5.1). When this field is absent for aperiodic CSI RS, and applyIndicatedTCI-State or applyIndicatedTCI-State2 is not configured, the UE shall use QCL information included in the "indicated" DL only/Joint TCI state as specified in TS 38.214 [19]. |
| csi-SSB-ResourceSet INTEGER (1..maxNrofCSI-SSB-ResourceSetsPerConfig) | CSI-SSB-ResourceSet for channel measurements. Entry number in csi-SSB-ResourceSetList in the CSI-ResourceConfig indicated by resourcesForChannelMeasurement in the CSI-ReportConfig indicated by reportConfigId above (value 1 corresponds to the first entry, value 2 to the second entry, and so on). |
| csi-IM-ResourcesForInterference INTEGER(1..maxNrofCSI-IM-ResourceSetsPerConfig) · OPTIONAL Cond CSI-IM-ForInterference since v15.3.0 | CSI-IM-ResourceSet for interference measurement. Entry number in csi-IM-ResourceSetList in the CSI-ResourceConfig indicated by csi-IM-ResourcesForInterference in the CSI-ReportConfig indicated by reportConfigId above (value 1 corresponds to the first entry, value 2 to the second entry, and so on). The indicated CSI-IM-ResourceSet should have exactly the same number of resources like the NZP-CSI-RS-ResourceSet indicated in resourceSet within nzp-CSI-RS . |
| nzp-CSI-RS-ResourcesForInterference INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) · OPTIONAL Cond NZP-CSI-RS-ForInterference since v15.3.0 | NZP-CSI-RS-ResourceSet for interference measurement. Entry number in nzp-CSI-RS-ResourceSetList in the CSI-ResourceConfig indicated by nzp-CSI-RS-ResourcesForInterference in the CSI-ReportConfig indicated by reportConfigId above (value 1 corresponds to the first entry, value 2 to the second entry, and so on). |
| resourcesForChannel2-r17 CHOICE { · OPTIONAL Need R since v17.0.0 | Configures reference signals for channel measurement corresponding to the second resource set for L1-RSRP measurement as configured in IE CSI-ResourceConfig when nrofReportedGroups-r17 is configured in IE CSI-ReportConfig . If this is present, network configures csi-SSB-ResourceSetExt instead of csi-SSB-ResourceSet and the UE ignores csi-SSB-ResourceSet in resourcesForChannel, and the resourcesForChannel configures the reference signals for channel measurement corresponding to the first resource set for L1-RSRP measurement (see TS 38.214 [19], clause 5.2.1.4). |
| nzp-CSI-RS2-r17 SEQUENCE { since v17.0.0 | |
| resourceSet2-r17 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) since v17.0.0 | |
| qcl-info2-r17 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId · OPTIONAL Cond Aperiodic since v17.0.0 | Fields qcl-Info and qcl-Info2 are lists of references to TCI-States for providing the QCL source and QCL type for each NZP-CSI-RS-Resource listed in nzp-CSI-RS-Resources of the NZP-CSI-RS-ResourceSet , indicated by resourceSet within nzp-CSI-RS and by resourceSet2 within nzp-CSI-RS2 , respectively. Each TCI-StateId refers to the TCI-State which has this value for tci-StateId and is defined in tci-StatesToAddModList or in dl-OrJointTCI-StateList in the PDSCH-Config included in the BWP-Downlink corresponding to the serving cell and to the DL BWP to which the resourcesForChannelMeasuremen t (in the CSI-ReportConfig indicated by reportConfigId above) belong to. First entry in qcl-info/qcl-info2 corresponds to first entry in nzp-CSI-RS-Resources of that NZP-CSI-RS-ResourceSet , second entry in qcl-info/qcl-info2 corresponds to second entry in nzp-CSI-RS-Resources , and so on (see TS 38.214 [19], clause 5.2.1.5.1). When this field is absent for aperiodic CSI RS, and applyIndicatedTCI-State or applyIndicatedTCI-State2 is not configured, the UE shall use QCL information included in the "indicated" DL only/Joint TCI state as specified in TS 38.214 [19]. |
| csi-SSB-ResourceSet2-r17 INTEGER (1..maxNrofCSI-SSB-ResourceSetsPerConfigExt) since v17.0.0 | CSI-SSB-ResourceSet for channel measurements. Entry number in csi-SSB-ResourceSetList in the CSI-ResourceConfig indicated by resourcesForChannelMeasurement in the CSI-ReportConfig indicated by reportConfigId above (value 1 corresponds to the first entry, value 2 to the second entry, and so on). |
| csi-SSB-ResourceSetExt INTEGER (1..maxNrofCSI-SSB-ResourceSetsPerConfigExt) · OPTIONAL Need R since v17.0.0 | |
| resourcesForChannelTDCP-r18 SEQUENCE { · OPTIONAL Cond TDCP since v18.0.0 | Configures reference signals for channel measurement corresponding to the second resource set and third resource set for TDCP reporting. All CSI resources of these two resource sets always share the same QCL-info with the resource sets indicated by resourcesForChannel as spcified in TS 38.214 [19]. |
| resourceSet2TDCP-r18 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) since v18.0.0 | |
| resourceSet3TDCP-r18 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) · OPTIONAL Need R since v18.0.0 | |
| applyIndicatedTCI-State-r18 CHOICE { · OPTIONAL Cond ApplyIndicatedTCI since v18.0.0 | This field indicates, for an aperiodic CSI-RS resource set (perSet) or for CSI-RS resource (perResource), if UE applies the first or the second "indicated" DL only TCI or joint TCI as specified in TS 38.214 [19], clause 5.2.1.5.1. The applyIndicatedTCI-State is for ResourcesForChannel , and applyIndicatedTCI-State2 is for ResourcesForChannels2. When applyIndicatedTCI-State and applyIndicatedTCI-State2 are absent, the UE shall use qcl-info for ResourcesForChannel and use qcl-info2 for ResourcesForChannel2. |
| perSet-r18 ENUMERATED {first, second} since v18.0.0 | |
| perResource-r18 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF ENUMERATED {first, second} since v18.0.0 | |
| applyIndicatedTCI-State2-r18 CHOICE { · OPTIONAL Cond SecondCSICMR since v18.0.0 | This field indicates, for an aperiodic CSI-RS resource set (perSet) or for CSI-RS resource (perResource), if UE applies the first or the second "indicated" DL only TCI or joint TCI as specified in TS 38.214 [19], clause 5.2.1.5.1. The applyIndicatedTCI-State is for ResourcesForChannel , and applyIndicatedTCI-State2 is for ResourcesForChannels2. When applyIndicatedTCI-State and applyIndicatedTCI-State2 are absent, the UE shall use qcl-info for ResourcesForChannel and use qcl-info2 for ResourcesForChannel2. |
| perSet-r18 ENUMERATED {first, second} since v18.0.0 | |
| perResource-r18 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF ENUMERATED {first, second} since v18.0.0 | |
| csi-ReportSubConfigTriggerList-r18 CSI-ReportSubConfigTriggerList-r18 · OPTIONAL Need R since v18.0.0 | A list of sub-configuration ID(s) of N sub-configurations out of L configured sub-configurations within a CSI-ReportConfig associated with a triggering state for aperiodic CSI reporting on PUSCH. |
| resourcesForChannelCLI-r19 SEQUENCE { · OPTIONAL Need R since v19.0.0 | Configures CLI measurement resource set and the list of corresponding references to TCI-States. If present, the following fields should be ignored by the UE: resourcesForChannel, csi-IM-ResourcesForInterference, nzp-CSI-RS-ResourcesForInterference, resourcesForChannel2-r17, resourcesForChannelTDCP-r18, applyIndicatedTCI-State-r18, csi-ReportSubConfigTriggerList-r18. |
| resourceSetCLI-r19 INTEGER (1..maxNrofCLI-MeasResourceSetsPerConfig-r19) · OPTIONAL Need R since v19.0.0 | CLI measurement resource set for L1 UE-to-UE CLI measurements. Entry number in cli-MeasResourceSetList in the CSI-ResourceConfig indicated by resourcesForChannelMeasurement in the CSI-ReportConfig indicated by reportConfigId above (value 1 corresponds to the first entry, value 2 to the second entry, and so on). |
| qcl-infoCLI-r19 SEQUENCE (SIZE(1..maxNrofCLI-MeasResourceSetsPerConfig-r19)) OF TCI-StateId · OPTIONAL Need R since v19.0.0 | List of references to TCI-States for providing the QCL source and QCL type for each CLI measurement resources listed in CLI measurement resource set indicated by resourceSetCLI . Each TCI-StateId refers to the TCI-State which has this value for tci-StateId and is defined in dl-OrJointTCI-StateList in the PDSCH-Config included in the BWP-Downlink corresponding to the serving cell and to the DL BWP to which the resourcesForChannelMeasurement (in the CSI-ReportConfig indicated by reportConfigId above) belong to. First entry in qcl-infoCLI corresponds to first entry in CLI measurement resources of that CLI measurement resource set, second entry in qcl-infoCLI corresponds to second entry in CLI measurement resources, and so on. The length of this list is the same as the number of resources in the CLI measurement resource set. |
| resourcesForChannelCJTC-r19 SEQUENCE { · OPTIONAL Cond CJTC since v19.0.0 | Configures reference signals for channel measurement corresponding to the second resource set, the third resource set and the fourth resource set as specified in clause 5.2.1.4.1 in TS 38.214 [19]. |
| nzp-CSI-RS2-r19 SEQUENCE { since v19.1.0 | |
| resourceSet2CJTC-r19 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) since v19.1.0 | |
| qcl-info2CJTC-r19 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId · OPTIONAL Need R since v19.1.0 | |
| nzp-CSI-RS3-r19 SEQUENCE { · OPTIONAL Need R since v19.1.0 | |
| resourceSet3CJTC-r19 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) since v19.1.0 | |
| qcl-info3CJTC-r19 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId · OPTIONAL Need R since v19.1.0 | |
| nzp-CSI-RS4-r19 SEQUENCE { · OPTIONAL Need R since v19.1.0 | |
| resourceSet4CJTC-r19 INTEGER (1..maxNrofNZP-CSI-RS-ResourceSetsPerConfig) since v19.1.0 | |
| qcl-info4CJTC-r19 SEQUENCE (SIZE(1..maxNrofAP-CSI-RS-ResourcesPerSet)) OF TCI-StateId · OPTIONAL Need R since v19.1.0 | |
| mr-SelectedResources-r19 SEQUENCE { · OPTIONAL Need R since v19.0.0 | Indicates one or two resources to be selected among eight CSI-RS resources. This field is only configured for codebookType set to typeI-SinglePanel or typeII-r16 . This field is used in clause 5.2.1.4.2 in TS 38.214 [19]. |
| firstSelectedResource-r19 INTEGER (1..8) since v19.0.0 | |
| secondSelectedResource-r19 INTEGER (1..8) · OPTIONAL Need R since v19.0.0 |
Used by (1)
Uses (9)
- CSI-ReportConfigId
- CSI-ReportSubConfigTriggerList-r18
- TCI-StateId
- maxNrofAP-CSI-RS-ResourcesPerSet
- maxNrofCLI-MeasResourceSetsPerConfig-r19
- maxNrofCSI-IM-ResourceSetsPerConfig
- maxNrofCSI-SSB-ResourceSetsPerConfig
- maxNrofCSI-SSB-ResourceSetsPerConfigExt
- maxNrofNZP-CSI-RS-ResourceSetsPerConfig