specviewer.org TS 38.331 ASN.1 index DMRS-BundlingPUCCH-Config-r17

DMRS-BundlingPUCCH-Config (DMRS-BundlingPUCCH-Config-r17)

RRC IE · TS 38.331 v19.4.0 (2026-09) · clause 6.3.2

DMRS-BundlingPUCCH-Config-r17 is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.

First seen v17.0.0 (2022-04) · Last changed v17.2.0 (2022-10)

Definition

The IE DMRS-BundlingPUCCH-Config-r17 is used to configure DMRS bundling for PUCCH.

DMRS-BundlingPUCCH-Config-r17 ::=         SEQUENCE {
    pucch-DMRS-Bundling-r17                   ENUMERATED {enabled}                                            OPTIONAL,   -- Need R
    pucch-TimeDomainWindowLength-r17          INTEGER (2..8)                                                  OPTIONAL,   -- Need S
    pucch-WindowRestart-r17                   ENUMERATED {enabled}                                            OPTIONAL,   -- Need R
    pucch-FrequencyHoppingInterval-r17        ENUMERATED {s2, s4, s5, s10}                                    OPTIONAL,   -- Need S
    ...
}

Candidate change requests of v17.2.0

The CRs whose title or cover names this change, strong and likely matches only.

Fields (4)

FieldDescription
pucch-DMRS-Bundling-r17
ENUMERATED {enabled} · OPTIONAL Need R
Indicates whether DMRS bundling and time domain window for PUCCH are jointly enabled.
pucch-TimeDomainWindowLength-r17
INTEGER (2..8) · OPTIONAL Need S
Configures the length of a nominal time domain window in slots for DMRS bundling for PUCCH. The value shall not exceed the maximum duration for DMRS bundling for PUCCH as specified in TS 38.306 [26]. If this field is absent, the UE shall apply the default value that is the minimum value in the unit of consecutive slots of the time duration for the transmission of all PUCCH repetitions and the maximum duration for DMRS bundling for PUCCH as specified in TS 38.306 [26].
pucch-WindowRestart-r17
ENUMERATED {enabled} · OPTIONAL Need R
Indicates whether UE bundles PUCCH DMRS remaining in a nominal time domain window after event(s) triggered by DCI or MAC CE that violate power consistency and phase continuity requirements is enabled (see TS 38.214 [19], clause 6.1.7). NOTE: Events, which are triggered by DCI or MAC CE, but do not require UE capability to resume maintaining power consistency and/or phase continuity as specified in clause 6.1.7 of TS 38.214 [19], are excluded.
pucch-FrequencyHoppingInterval-r17
ENUMERATED {s2, s4, s5, s10} · OPTIONAL Need S
Configures the number of consecutive slots for the UE to perform inter-slot frequency hopping with inter-slot bundling for PUCCH. When both inter-frequency hopping and DMRS bundling are enabled for PUCCH repetitions, the UE is expected to be configured with at least one pucch-FrequencyHoppingInterval-r17 and pucch-TimeDomainWindowLength-r17 . When DMRS bundling for PUCCH is enabled by pucch-DMRS-Bundling-r17, PUCCH frequency hopping interval is only determined by the configuration of PUCCH hopping interval if PUCCH hopping interval is configured. If the field is absent, the number of consecutive slots for the UE to perform inter-slot PUCCH frequency hopping is indicated by pucch-TimeDomainWindowLength-r17.

Used by (1)

In the viewer