EventTriggerConfig
EventTriggerConfig is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.
Definition
EventTriggerConfig ::= SEQUENCE {
eventId CHOICE {
eventA1 SEQUENCE {
a1-Threshold MeasTriggerQuantity,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger
},
eventA2 SEQUENCE {
a2-Threshold MeasTriggerQuantity,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger
},
eventA3 SEQUENCE {
a3-Offset MeasTriggerQuantityOffset,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger,
useAllowedCellList BOOLEAN
},
eventA4 SEQUENCE {
a4-Threshold MeasTriggerQuantity,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger,
useAllowedCellList BOOLEAN
},
eventA5 SEQUENCE {
a5-Threshold1 MeasTriggerQuantity,
a5-Threshold2 MeasTriggerQuantity,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger,
useAllowedCellList BOOLEAN
},
eventA6 SEQUENCE {
a6-Offset MeasTriggerQuantityOffset,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger,
useAllowedCellList BOOLEAN
},
...,
[[
eventX1-r17 SEQUENCE {
x1-Threshold1-Relay-r17 SL-MeasTriggerQuantity-r16,
x1-Threshold2-r17 MeasTriggerQuantity,
reportOnLeave-r17 BOOLEAN,
hysteresis-r17 Hysteresis,
timeToTrigger-r17 TimeToTrigger,
useAllowedCellList-r17 BOOLEAN
},
eventX2-r17 SEQUENCE {
x2-Threshold-Relay-r17 SL-MeasTriggerQuantity-r16,
reportOnLeave-r17 BOOLEAN,
hysteresis-r17 Hysteresis,
timeToTrigger-r17 TimeToTrigger
},
eventD1-r17 SEQUENCE {
distanceThreshFromReference1-r17 INTEGER(1.. 65525),
distanceThreshFromReference2-r17 INTEGER(1.. 65525),
referenceLocation1-r17 ReferenceLocation-r17,
referenceLocation2-r17 ReferenceLocation-r17,
reportOnLeave-r17 BOOLEAN,
hysteresisLocation-r17 HysteresisLocation-r17,
timeToTrigger-r17 TimeToTrigger
}
]],
[[
eventH1-r18 SEQUENCE {
h1-Threshold-r18 Altitude-r18,
h1-Hysteresis-r18 HysteresisAltitude-r18,
reportOnLeave-r18 BOOLEAN,
timeToTrigger-r18 TimeToTrigger,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventH2-r18 SEQUENCE {
h2-Threshold-r18 Altitude-r18,
h2-Hysteresis-r18 HysteresisAltitude-r18,
reportOnLeave-r18 BOOLEAN,
timeToTrigger-r18 TimeToTrigger,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventA3H1-r18 SEQUENCE {
a3-Offset-r18 MeasTriggerQuantityOffset,
reportOnLeave-r18 BOOLEAN,
a3-Hysteresis-r18 Hysteresis,
timeToTrigger-r18 TimeToTrigger,
useAllowedCellList-r18 BOOLEAN,
h1-Threshold-r18 Altitude-r18,
h1-Hysteresis-r18 HysteresisAltitude-r18,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventA3H2-r18 SEQUENCE {
a3-Offset-r18 MeasTriggerQuantityOffset,
reportOnLeave-r18 BOOLEAN,
a3-Hysteresis-r18 Hysteresis,
timeToTrigger-r18 TimeToTrigger,
useAllowedCellList-r18 BOOLEAN,
h2-Threshold-r18 Altitude-r18,
h2-Hysteresis-r18 HysteresisAltitude-r18,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventA4H1-r18 SEQUENCE {
a4-Threshold-r18 MeasTriggerQuantity,
reportOnLeave-r18 BOOLEAN,
a4-Hysteresis-r18 Hysteresis,
timeToTrigger-r18 TimeToTrigger,
useAllowedCellList-r18 BOOLEAN,
h1-Threshold-r18 Altitude-r18,
h1-Hysteresis-r18 HysteresisAltitude-r18,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventA4H2-r18 SEQUENCE {
a4-Threshold-r18 MeasTriggerQuantity,
reportOnLeave-r18 BOOLEAN,
a4-Hysteresis-r18 Hysteresis,
timeToTrigger-r18 TimeToTrigger,
useAllowedCellList-r18 BOOLEAN,
h2-Threshold-r18 Altitude-r18,
h2-Hysteresis-r18 HysteresisAltitude-r18,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventA5H1-r18 SEQUENCE {
a5-Threshold1-r18 MeasTriggerQuantity,
a5-Threshold2-r18 MeasTriggerQuantity,
reportOnLeave-r18 BOOLEAN,
a5-Hysteresis-r18 Hysteresis,
timeToTrigger-r18 TimeToTrigger,
useAllowedCellList-r18 BOOLEAN,
h1-Threshold-r18 Altitude-r18,
h1-Hysteresis-r18 HysteresisAltitude-r18,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventA5H2-r18 SEQUENCE {
a5-Threshold1-r18 MeasTriggerQuantity,
a5-Threshold2-r18 MeasTriggerQuantity,
reportOnLeave-r18 BOOLEAN,
a5-Hysteresis-r18 Hysteresis,
timeToTrigger-r18 TimeToTrigger,
useAllowedCellList-r18 BOOLEAN,
h2-Threshold-r18 Altitude-r18,
h2-Hysteresis-r18 HysteresisAltitude-r18,
includeAltitudeUE-r18 BOOLEAN,
simulMultiTriggerSingleMeasReport-r18 BOOLEAN
},
eventD2-r18 SEQUENCE {
distanceThreshFromReference1-r18 INTEGER(1.. 65535),
distanceThreshFromReference2-r18 INTEGER(1.. 65535),
reportOnLeave-r18 BOOLEAN,
hysteresisLocation-r18 HysteresisLocation-r17,
timeToTrigger-r18 TimeToTrigger
}
]]
},
rsType NR-RS-Type,
reportInterval ReportInterval,
reportAmount ENUMERATED {r1, r2, r4, r8, r16, r32, r64, infinity},
reportQuantityCell MeasReportQuantity,
maxReportCells INTEGER (1..maxCellReport),
reportQuantityRS-Indexes MeasReportQuantity OPTIONAL, -- Need R
maxNrofRS-IndexesToReport INTEGER (1..maxNrofIndexesToReport) OPTIONAL, -- Need R
includeBeamMeasurements BOOLEAN,
reportAddNeighMeas ENUMERATED {setup} OPTIONAL, -- Need R
...,
[[
measRSSI-ReportConfig-r16 MeasRSSI-ReportConfig-r16 OPTIONAL, -- Need R
useT312-r16 BOOLEAN OPTIONAL, -- Need M
includeCommonLocationInfo-r16 ENUMERATED {true} OPTIONAL, -- Need R
includeBT-Meas-r16 SetupRelease {BT-NameList-r16} OPTIONAL, -- Need M
includeWLAN-Meas-r16 SetupRelease {WLAN-NameList-r16} OPTIONAL, -- Need M
includeSensor-Meas-r16 SetupRelease {Sensor-NameList-r16} OPTIONAL -- Need M
]],
[[
coarseLocationRequest-r17 ENUMERATED {true} OPTIONAL, -- Need R
reportQuantityRelay-r17 SL-MeasReportQuantity-r16 OPTIONAL -- Need R
]],
[[
numberOfTriggeringCells-r18 INTEGER (2..maxCellReport) OPTIONAL, -- Need R
cellIndividualOffsetList-r18 SEQUENCE (SIZE (1..maxNrofCellMeas)) OF CellIndividualOffsetList-r18 OPTIONAL, -- Need R
eventX1-SD-Threshold1-r18 SL-MeasTriggerQuantity-r16 OPTIONAL, -- Need S
eventX2-SD-Threshold-r18 SL-MeasTriggerQuantity-r16 OPTIONAL, -- Need S
reportOnBestCellChange-r18 ENUMERATED {n1, n2} OPTIONAL, -- Need R
enteringLeavingReport-r18 ENUMERATED {true} OPTIONAL -- Need R
]],
[[
eventD2PhysCellId-r19 PhysCellId OPTIONAL -- Need R
]]
}Candidate change requests of v19.1.0
The CRs whose title or cover names this change, strong and likely matches only.
- CR 5618 r2 (strong): Corrections on eventD2 (Rel-19)
Fields (162)
| Field | Description |
|---|---|
| eventId CHOICE { | Choice of NR event triggered reporting criteria. |
| eventA1 SEQUENCE { | |
| a1-Threshold MeasTriggerQuantity | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventA2 SEQUENCE { | |
| a2-Threshold MeasTriggerQuantity | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventA3 SEQUENCE { | |
| a3-Offset MeasTriggerQuantityOffset | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList BOOLEAN since v17.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| eventA4 SEQUENCE { | |
| a4-Threshold MeasTriggerQuantity | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList BOOLEAN since v17.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| eventA5 SEQUENCE { | |
| a5-Threshold1 MeasTriggerQuantity | |
| a5-Threshold2 MeasTriggerQuantity | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList BOOLEAN since v17.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| eventA6 SEQUENCE { | |
| a6-Offset MeasTriggerQuantityOffset | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList BOOLEAN since v17.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| eventX1-r17 SEQUENCE { since v17.0.0 | |
| x1-Threshold1-Relay-r17 SL-MeasTriggerQuantity-r16 since v17.0.0 | |
| x1-Threshold2-r17 MeasTriggerQuantity since v17.0.0 | |
| reportOnLeave-r17 BOOLEAN since v17.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis-r17 Hysteresis since v17.0.0 | |
| timeToTrigger-r17 TimeToTrigger since v17.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList-r17 BOOLEAN since v17.1.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| eventX2-r17 SEQUENCE { since v17.0.0 | |
| x2-Threshold-Relay-r17 SL-MeasTriggerQuantity-r16 since v17.0.0 | |
| reportOnLeave-r17 BOOLEAN since v17.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresis-r17 Hysteresis since v17.0.0 | |
| timeToTrigger-r17 TimeToTrigger since v17.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventD1-r17 SEQUENCE { since v17.0.0 | |
| distanceThreshFromReference1-r17 INTEGER(1.. 65525) since v17.1.0 | Distance from a fixed reference location configured with referenceLocation1 or referenceLocation2 for eventD1 . Distance from a moving reference location determined by the UE based on the serving cell movingReferenceLocation broadcast in SIB19 or referenceLocation and the corresponding epoch time and satellite ephemeris configured within the MeasObjectNR associated to the event for eventD2 . Each step represents 50m. |
| distanceThreshFromReference2-r17 INTEGER(1.. 65525) since v17.1.0 | Distance from a fixed reference location configured with referenceLocation1 or referenceLocation2 for eventD1 . Distance from a moving reference location determined by the UE based on the serving cell movingReferenceLocation broadcast in SIB19 or referenceLocation and the corresponding epoch time and satellite ephemeris configured within the MeasObjectNR associated to the event for eventD2 . Each step represents 50m. |
| referenceLocation1-r17 ReferenceLocation-r17 since v17.0.0 | The referenceLocation1 is associated to serving cell and referenceLocation2 is associated to neighbour cell. |
| referenceLocation2-r17 ReferenceLocation-r17 since v17.0.0 | The referenceLocation1 is associated to serving cell and referenceLocation2 is associated to neighbour cell. |
| reportOnLeave-r17 BOOLEAN since v17.1.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresisLocation-r17 HysteresisLocation-r17 since v17.1.0 | |
| timeToTrigger-r17 TimeToTrigger since v17.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventH1-r18 SEQUENCE { since v18.0.0 | |
| h1-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h1-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventH2-r18 SEQUENCE { since v18.0.0 | |
| h2-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h2-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventA3H1-r18 SEQUENCE { since v18.0.0 | |
| a3-Offset-r18 MeasTriggerQuantityOffset since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| a3-Hysteresis-r18 Hysteresis since v18.0.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList-r18 BOOLEAN since v18.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| h1-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h1-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventA3H2-r18 SEQUENCE { since v18.0.0 | |
| a3-Offset-r18 MeasTriggerQuantityOffset since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| a3-Hysteresis-r18 Hysteresis since v18.0.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList-r18 BOOLEAN since v18.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| h2-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h2-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventA4H1-r18 SEQUENCE { since v18.0.0 | |
| a4-Threshold-r18 MeasTriggerQuantity since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| a4-Hysteresis-r18 Hysteresis since v18.0.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList-r18 BOOLEAN since v18.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| h1-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h1-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventA4H2-r18 SEQUENCE { since v18.0.0 | |
| a4-Threshold-r18 MeasTriggerQuantity since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| a4-Hysteresis-r18 Hysteresis since v18.0.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList-r18 BOOLEAN since v18.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| h2-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h2-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventA5H1-r18 SEQUENCE { since v18.0.0 | |
| a5-Threshold1-r18 MeasTriggerQuantity since v18.0.0 | |
| a5-Threshold2-r18 MeasTriggerQuantity since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| a5-Hysteresis-r18 Hysteresis since v18.0.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList-r18 BOOLEAN since v18.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| h1-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h1-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventA5H2-r18 SEQUENCE { since v18.0.0 | |
| a5-Threshold1-r18 MeasTriggerQuantity since v18.0.0 | |
| a5-Threshold2-r18 MeasTriggerQuantity since v18.0.0 | |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| a5-Hysteresis-r18 Hysteresis since v18.0.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| useAllowedCellList-r18 BOOLEAN since v18.0.0 | Indicates whether only the cells included in the allow-list of the associated measObject are applicable as specified in 5.5.4.1. |
| h2-Threshold-r18 Altitude-r18 since v18.0.0 | |
| h2-Hysteresis-r18 HysteresisAltitude-r18 since v18.0.0 | |
| includeAltitudeUE-r18 BOOLEAN since v18.0.0 | This field is used to request UE to report altitude information. |
| simulMultiTriggerSingleMeasReport-r18 BOOLEAN since v18.0.0 | Indicates when multiple events with the same eventID satisfy the measurement report triggering condition(s), whether to consider only the event with the smallest value between the altitude of the UE and the configured altitude threshold. |
| eventD2-r18 SEQUENCE { since v18.1.0 | |
| distanceThreshFromReference1-r18 INTEGER(1.. 65535) since v18.1.0 | Distance from a fixed reference location configured with referenceLocation1 or referenceLocation2 for eventD1 . Distance from a moving reference location determined by the UE based on the serving cell movingReferenceLocation broadcast in SIB19 or referenceLocation and the corresponding epoch time and satellite ephemeris configured within the MeasObjectNR associated to the event for eventD2 . Each step represents 50m. |
| distanceThreshFromReference2-r18 INTEGER(1.. 65535) since v18.1.0 | Distance from a fixed reference location configured with referenceLocation1 or referenceLocation2 for eventD1 . Distance from a moving reference location determined by the UE based on the serving cell movingReferenceLocation broadcast in SIB19 or referenceLocation and the corresponding epoch time and satellite ephemeris configured within the MeasObjectNR associated to the event for eventD2 . Each step represents 50m. |
| reportOnLeave-r18 BOOLEAN since v18.1.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met if configured in eventD1 , eventD2 , eventH1 , eventH2 as specified in 5.5.4.1. |
| hysteresisLocation-r18 HysteresisLocation-r17 since v18.1.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.1.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| rsType NR-RS-Type | |
| reportInterval ReportInterval | |
| reportAmount ENUMERATED {r1, r2, r4, r8, r16, r32, r64, infinity} | Number of measurement reports applicable for eventTriggered as well as for periodical report types. |
| reportQuantityCell MeasReportQuantity | The cell measurement quantities to be included in the measurement report. |
| maxReportCells INTEGER (1..maxCellReport) | Max number of non-serving cells to include in the measurement report. |
| reportQuantityRS-Indexes MeasReportQuantity · OPTIONAL Need R since v15.4.0 | Indicates which measurement information per RS index the UE shall include in the measurement report. |
| maxNrofRS-IndexesToReport INTEGER (1..maxNrofIndexesToReport) · OPTIONAL Need R since v15.4.0 | Max number of RS indexes to include in the measurement report for A1-A6 events. |
| includeBeamMeasurements BOOLEAN since v15.1.0 | |
| reportAddNeighMeas ENUMERATED {setup} · OPTIONAL Need R | Indicates that the UE shall include the best neighbour cells per serving frequency. |
| measRSSI-ReportConfig-r16 MeasRSSI-ReportConfig-r16 · OPTIONAL Need R since v16.0.0 | |
| useT312-r16 BOOLEAN · OPTIONAL Need M since v16.0.0 | If value TRUE is configured, the UE shall use the timer T312 with the value t312 as specified in the corresponding measObjectNR . If value FALSE is configured, the timer T312 is considered as disabled. Network configures value TRUE only if reportType is set to eventTriggered . |
| includeCommonLocationInfo-r16 ENUMERATED {true} · OPTIONAL Need R since v16.0.0 | |
| includeBT-Meas-r16 SetupRelease {BT-NameList-r16} · OPTIONAL Need M since v16.0.0 | |
| includeWLAN-Meas-r16 SetupRelease {WLAN-NameList-r16} · OPTIONAL Need M since v16.0.0 | |
| includeSensor-Meas-r16 SetupRelease {Sensor-NameList-r16} · OPTIONAL Need M since v16.0.0 | |
| coarseLocationRequest-r17 ENUMERATED {true} · OPTIONAL Need R since v17.1.0 | This field is used to request UE to report coarse location information. |
| reportQuantityRelay-r17 SL-MeasReportQuantity-r16 · OPTIONAL Need R since v17.1.0 | |
| numberOfTriggeringCells-r18 INTEGER (2..maxCellReport) · OPTIONAL Need R since v18.0.0 | Indicates the number of cells detected that are required to fulfill an event for a measurement report to be triggered. This field is applicable only for the events concerning neighbor cells, i.e. eventA3 , eventA4, eventA5, eventA3H1, eventA3H2, eventA4H1, eventA4H2, eventA5H1, eventA5H2 . |
| cellIndividualOffsetList-r18 SEQUENCE (SIZE (1..maxNrofCellMeas)) OF CellIndividualOffsetList-r18 · OPTIONAL Need R since v18.0.0 | |
| eventX1-SD-Threshold1-r18 SL-MeasTriggerQuantity-r16 · OPTIONAL Need S since v18.1.0 | |
| eventX2-SD-Threshold-r18 SL-MeasTriggerQuantity-r16 · OPTIONAL Need S since v18.1.0 | |
| reportOnBestCellChange-r18 ENUMERATED {n1, n2} · OPTIONAL Need R since v18.2.0 | Indicates whether the UE shall only send measurement report if the measured best cell (when configured to n1 ) or two best cells (when configured to n2 ) have changed. In this release of the specification, this field is applicable only for the events concerning neighbor cells. This field can only be configured when the value of the field reportAmount is set to any other value than r1 . |
| enteringLeavingReport-r18 ENUMERATED {true} · OPTIONAL Need R since v18.2.0 | |
| eventD2PhysCellId-r19 PhysCellId · OPTIONAL Need R since v19.1.0 | Physical cell identity of a cell corresponding to the NTN neighbour cell list when multiple trigger moving reference locations are configured in MeasObjectNR (i.e., CellsToAddMod ) for eventD2 . |
Used by (1)
Uses (23)
- Altitude-r18
- BT-NameList-r16
- CellIndividualOffsetList-r18
- Hysteresis
- HysteresisAltitude-r18
- HysteresisLocation-r17
- MeasRSSI-ReportConfig-r16
- MeasReportQuantity
- MeasTriggerQuantity
- MeasTriggerQuantityOffset
- NR-RS-Type
- PhysCellId
- ReferenceLocation-r17
- ReportInterval
- SL-MeasReportQuantity-r16
- SL-MeasTriggerQuantity-r16
- Sensor-NameList-r16
- SetupRelease
- TimeToTrigger
- WLAN-NameList-r16
- maxCellReport
- maxNrofCellMeas
- maxNrofIndexesToReport