EventTriggerConfigInterRAT
EventTriggerConfigInterRAT is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.
Definition
EventTriggerConfigInterRAT ::= SEQUENCE {
eventId CHOICE {
eventB1 SEQUENCE {
b1-ThresholdEUTRA MeasTriggerQuantityEUTRA,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger,
...
},
eventB2 SEQUENCE {
b2-Threshold1 MeasTriggerQuantity,
b2-Threshold2EUTRA MeasTriggerQuantityEUTRA,
reportOnLeave BOOLEAN,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger,
...
},
...,
[[
eventB1-UTRA-FDD-r16 SEQUENCE {
b1-ThresholdUTRA-FDD-r16 MeasTriggerQuantityUTRA-FDD-r16,
reportOnLeave-r16 BOOLEAN,
hysteresis-r16 Hysteresis,
timeToTrigger-r16 TimeToTrigger,
...
},
eventB2-UTRA-FDD-r16 SEQUENCE {
b2-Threshold1-r16 MeasTriggerQuantity,
b2-Threshold2UTRA-FDD-r16 MeasTriggerQuantityUTRA-FDD-r16,
reportOnLeave-r16 BOOLEAN,
hysteresis-r16 Hysteresis,
timeToTrigger-r16 TimeToTrigger,
...
}
]],
[[
eventY1-Relay-r17 SEQUENCE {
y1-Threshold1-r17 MeasTriggerQuantity,
y1-Threshold2-Relay-r17 SL-MeasTriggerQuantity-r16,
reportOnLeave-r17 BOOLEAN,
hysteresis-r17 Hysteresis,
timeToTrigger-r17 TimeToTrigger,
...
},
eventY2-Relay-r17 SEQUENCE {
y2-Threshold-Relay-r17 SL-MeasTriggerQuantity-r16,
reportOnLeave-r17 BOOLEAN,
hysteresis-r17 Hysteresis,
timeToTrigger-r17 TimeToTrigger,
...
}
]],
[[
eventZ1-Relay-r18 SEQUENCE {
z1-Threshold1-Relay-r18 SEQUENCE {
sl-RSRP-r18 SL-MeasTriggerQuantity-r16,
sd-RSRP-r18 SL-MeasTriggerQuantity-r16 OPTIONAL -- Need S
},
z1-Threshold2-Relay-r18 SL-MeasTriggerQuantity-r16,
reportOnLeave-r18 BOOLEAN,
hysteresis-r18 Hysteresis,
timeToTrigger-r18 TimeToTrigger,
...
}
]]
},
rsType NR-RS-Type,
reportInterval ReportInterval,
reportAmount ENUMERATED {r1, r2, r4, r8, r16, r32, r64, infinity},
reportQuantity MeasReportQuantity,
maxReportCells INTEGER (1..maxCellReport),
...,
[[
reportQuantityUTRA-FDD-r16 MeasReportQuantityUTRA-FDD-r16 OPTIONAL -- Need R
]],
[[
includeCommonLocationInfo-r16 ENUMERATED {true} OPTIONAL, -- Need R
includeBT-Meas-r16 SetupRelease {BT-NameList-r16} OPTIONAL, -- Need M
includeWLAN-Meas-r16 SetupRelease {WLAN-NameList-r16} OPTIONAL, -- Need M
includeSensor-Meas-r16 SetupRelease {Sensor-NameList-r16} OPTIONAL -- Need M
]],
[[
reportQuantityRelay-r17 SL-MeasReportQuantity-r16 OPTIONAL -- Need R
]],
[[
cellIndividualOffsetList-r18 SEQUENCE (SIZE (1..maxCellMeasEUTRA)) OF CellIndividualOffsetList-EUTRA-r18 OPTIONAL -- Need R
]]
}Candidate change requests of v18.1.0
The CRs whose title or cover names this change, strong and likely matches only.
- CR 4608 r2 (strong): [E073][H059][B013]Clarification on cell individual offset in ReportConfig [CIO_in_ReportConfig]
Fields (54)
| Field | Description |
|---|---|
| eventId CHOICE { | Choice of inter RAT event triggered reporting criteria. |
| eventB1 SEQUENCE { | |
| b1-ThresholdEUTRA MeasTriggerQuantityEUTRA | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventB2 SEQUENCE { | |
| b2-Threshold1 MeasTriggerQuantity | NR threshold to be used in inter RAT measurement report triggering condition for event B2. |
| b2-Threshold2EUTRA MeasTriggerQuantityEUTRA | |
| reportOnLeave BOOLEAN | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. |
| hysteresis Hysteresis | |
| timeToTrigger TimeToTrigger | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventB1-UTRA-FDD-r16 SEQUENCE { since v16.0.0 | |
| b1-ThresholdUTRA-FDD-r16 MeasTriggerQuantityUTRA-FDD-r16 since v16.0.0 | |
| reportOnLeave-r16 BOOLEAN since v16.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. |
| hysteresis-r16 Hysteresis since v16.0.0 | |
| timeToTrigger-r16 TimeToTrigger since v16.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventB2-UTRA-FDD-r16 SEQUENCE { since v16.0.0 | |
| b2-Threshold1-r16 MeasTriggerQuantity since v16.0.0 | NR threshold to be used in inter RAT measurement report triggering condition for event B2. |
| b2-Threshold2UTRA-FDD-r16 MeasTriggerQuantityUTRA-FDD-r16 since v16.0.0 | |
| reportOnLeave-r16 BOOLEAN since v16.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. |
| hysteresis-r16 Hysteresis since v16.0.0 | |
| timeToTrigger-r16 TimeToTrigger since v16.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventY1-Relay-r17 SEQUENCE { since v17.0.0 | |
| y1-Threshold1-r17 MeasTriggerQuantity since v17.0.0 | NR threshold to be used in measurement report triggering condition for event Y1. |
| y1-Threshold2-Relay-r17 SL-MeasTriggerQuantity-r16 since v17.0.0 | L2 U2N Relay threshold value associated with the selected trigger quantity (i.e. RSRP) to be used in measurement report triggering condition for event Y1. |
| reportOnLeave-r17 BOOLEAN since v17.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. |
| hysteresis-r17 Hysteresis since v17.0.0 | |
| timeToTrigger-r17 TimeToTrigger since v17.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventY2-Relay-r17 SEQUENCE { since v17.0.0 | |
| y2-Threshold-Relay-r17 SL-MeasTriggerQuantity-r16 since v17.0.0 | L2 U2N Relay threshold value associated with the selected trigger quantity (i.e. RSRP) to be used in measurement report triggering condition for event Y2. |
| reportOnLeave-r17 BOOLEAN since v17.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. |
| hysteresis-r17 Hysteresis since v17.0.0 | |
| timeToTrigger-r17 TimeToTrigger since v17.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| eventZ1-Relay-r18 SEQUENCE { since v18.0.0 | |
| z1-Threshold1-Relay-r18 SEQUENCE { since v18.0.0 | L2 U2N Relay threshold value associated with the selected trigger quantity (i.e. SL-RSRP and/or SD-RSRP) to be used in measurement report triggering condition for serving Relay UE in event Z1. If the field sd-RSRP is not included, the UE considers it to be equal to sl-RSRP. |
| sl-RSRP-r18 SL-MeasTriggerQuantity-r16 since v18.0.0 | |
| sd-RSRP-r18 SL-MeasTriggerQuantity-r16 · OPTIONAL Need S since v18.0.0 | |
| z1-Threshold2-Relay-r18 SL-MeasTriggerQuantity-r16 since v18.0.0 | L2 U2N Relay threshold value associated with the selected trigger quantity (i.e. SD-RSRP) to be used in measurement report triggering condition for candidate Relay UE in event Z1. |
| reportOnLeave-r18 BOOLEAN since v18.0.0 | Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for a cell in cellsTriggeredList or for a L2 U2N Relay UE in relaysTriggeredList , as specified in 5.5.4.1. |
| hysteresis-r18 Hysteresis since v18.0.0 | |
| timeToTrigger-r18 TimeToTrigger since v18.0.0 | Time during which specific criteria for the event needs to be met in order to trigger a measurement report. |
| rsType NR-RS-Type | |
| reportInterval ReportInterval | |
| reportAmount ENUMERATED {r1, r2, r4, r8, r16, r32, r64, infinity} | Number of measurement reports applicable for eventTriggered as well as for periodical report types |
| reportQuantity MeasReportQuantity | The cell measurement quantities to be included in the measurement report. If the field eventB1-UTRA-FDD or eventB2-UTRA-FDD is present, the UE shall ignore the value(s) provided in reportQuantity . |
| maxReportCells INTEGER (1..maxCellReport) | Max number of non-serving cells/candidate L2 U2N Relay UEs to include in the measurement report. |
| reportQuantityUTRA-FDD-r16 MeasReportQuantityUTRA-FDD-r16 · OPTIONAL Need R since v16.0.0 | The cell measurement quantities to be included in the measurement report. If the field eventB1-UTRA-FDD or eventB2-UTRA-FDD is present, the UE shall ignore the value(s) provided in reportQuantity . |
| includeCommonLocationInfo-r16 ENUMERATED {true} · OPTIONAL Need R since v16.5.0 | |
| includeBT-Meas-r16 SetupRelease {BT-NameList-r16} · OPTIONAL Need M since v16.5.0 | |
| includeWLAN-Meas-r16 SetupRelease {WLAN-NameList-r16} · OPTIONAL Need M since v16.5.0 | |
| includeSensor-Meas-r16 SetupRelease {Sensor-NameList-r16} · OPTIONAL Need M since v16.5.0 | |
| reportQuantityRelay-r17 SL-MeasReportQuantity-r16 · OPTIONAL Need R since v17.0.0 | The L2 U2N Relay UE measurement quantity to be included in measurement report. |
| cellIndividualOffsetList-r18 SEQUENCE (SIZE (1..maxCellMeasEUTRA)) OF CellIndividualOffsetList-EUTRA-r18 · OPTIONAL Need R since v18.1.0 |
Used by (1)
Uses (18)
- BT-NameList-r16
- CellIndividualOffsetList-EUTRA-r18
- Hysteresis
- MeasReportQuantity
- MeasReportQuantityUTRA-FDD-r16
- MeasTriggerQuantity
- MeasTriggerQuantityEUTRA
- MeasTriggerQuantityUTRA-FDD-r16
- NR-RS-Type
- ReportInterval
- SL-MeasReportQuantity-r16
- SL-MeasTriggerQuantity-r16
- Sensor-NameList-r16
- SetupRelease
- TimeToTrigger
- WLAN-NameList-r16
- maxCellMeasEUTRA
- maxCellReport