specviewer.org TS 38.331 ASN.1 index PCI-Range

PCI-Range

RRC IE · TS 38.331 v19.4.0 (2026-09) · clause 6.3.2

PCI-Range is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.

First seen v15.1.0 (2018-04) · Last changed v15.2.0 (2018-06)

Definition

The IE PCI-Range is used to encode either a single or a range of physical cell identities. The range is encoded by using a start value and by indicating the number of consecutive physical cell identities (including start ) in the range. For fields comprising multiple occurrences of PCI-Range , the Network may configure overlapping ranges of physical cell identities.

PCI-Range ::=                       SEQUENCE {
    start                               PhysCellId,
    range                               ENUMERATED {n4, n8, n12, n16, n24, n32, n48, n64, n84,
        n96, n128, n168, n252, n504, n1008,spare1}                  OPTIONAL    -- Need S
}

Fields (2)

FieldDescription
start
PhysCellId
Indicates the lowest physical cell identity in the range.
range
ENUMERATED {n4, n8, n12, n16, n24, n32, n48, n64, n84, n96, n128, n168, n252, n504, n1008,spare1} · OPTIONAL Need S
Indicates the number of physical cell identities in the range (including start ). Value n4 corresponds with 4, value n8 corresponds with 8 and so on. The UE shall apply value 1 in case the field is absent, in which case only the physical cell identity value indicated by start applies.

Used by (13)

Uses (1)

In the viewer