specviewer.org TS 38.331 ASN.1 index PUSCH-TPC-CommandConfig

PUSCH-TPC-CommandConfig

RRC IE · TS 38.331 v19.4.0 (2026-09) · clause 6.3.2

PUSCH-TPC-CommandConfig is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.

First seen v15.1.0 (2018-04) · Not changed since

Definition

The IE PUSCH-TPC-CommandConfig is used to configure the UE for extracting TPC commands for PUSCH from a group-TPC messages on DCI.

PUSCH-TPC-CommandConfig ::=         SEQUENCE {
    tpc-Index                           INTEGER (1..15)                                                 OPTIONAL,   -- Cond SUL
    tpc-IndexSUL                        INTEGER (1..15)                                                 OPTIONAL,   -- Cond SUL-Only
    targetCell                          ServCellIndex                                                   OPTIONAL,   -- Need S
    ...
}

Fields (3)

FieldDescription
tpc-Index
INTEGER (1..15) · OPTIONAL Cond SUL
An index determining the position of the first bit of TPC command inside the DCI format 2-2 payload.
tpc-IndexSUL
INTEGER (1..15) · OPTIONAL Cond SUL-Only
An index determining the position of the first bit of TPC command inside the DCI format 2-2 payload.
targetCell
ServCellIndex · OPTIONAL Need S
The serving cell to which the acquired power control commands are applicable. If the value is absent, the UE applies the TPC commands to the serving cell on which the command has been received.

Used by (1)

Uses (1)

In the viewer