specviewer.org TS 38.331 ASN.1 index PhysicalCellGroupConfig

PhysicalCellGroupConfig

RRC IE · TS 38.331 v19.4.0 (2026-09) · clause 6.3.2

PhysicalCellGroupConfig is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.

First seen v15.0.0 (2018-01) · Last changed v19.1.0 (2026-01)

Definition

The IE PhysicalCellGroupConfig is used to configure cell-group specific L1 parameters.

PhysicalCellGroupConfig ::=         SEQUENCE {
    harq-ACK-SpatialBundlingPUCCH       ENUMERATED {true}                                               OPTIONAL,   -- Need S
    harq-ACK-SpatialBundlingPUSCH       ENUMERATED {true}                                               OPTIONAL,   -- Need S
    p-NR-FR1                            P-Max                                                           OPTIONAL,   -- Need R
    pdsch-HARQ-ACK-Codebook             ENUMERATED {semiStatic, dynamic},
    tpc-SRS-RNTI                        RNTI-Value                                                      OPTIONAL,   -- Need R
    tpc-PUCCH-RNTI                      RNTI-Value                                                      OPTIONAL,   -- Need R
    tpc-PUSCH-RNTI                      RNTI-Value                                                      OPTIONAL,   -- Need R
    sp-CSI-RNTI                         RNTI-Value                                                      OPTIONAL,   -- Need R
    cs-RNTI                             SetupRelease { RNTI-Value }                                     OPTIONAL,   -- Need M
    ...,
    [[
        mcs-C-RNTI                          RNTI-Value                                                      OPTIONAL,   -- Need R
        p-UE-FR1                            P-Max                                                           OPTIONAL    -- Cond MCG-Only
    ]],
    [[
        xScale                              ENUMERATED {dB0, dB6, spare2, spare1}                           OPTIONAL    -- Cond SCG-Only
    ]],
    [[
        pdcch-BlindDetection                SetupRelease { PDCCH-BlindDetection }                           OPTIONAL    -- Need M
    ]],
    [[
        dcp-Config-r16                      SetupRelease { DCP-Config-r16 }                                 OPTIONAL,   -- Need M
        harq-ACK-SpatialBundlingPUCCH-secondaryPUCCHgroup-r16    ENUMERATED {enabled, disabled}             OPTIONAL,   -- Cond twoPUCCHgroup
        harq-ACK-SpatialBundlingPUSCH-secondaryPUCCHgroup-r16    ENUMERATED {enabled, disabled}             OPTIONAL,   -- Cond twoPUCCHgroup
        pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup-r16          ENUMERATED {semiStatic, dynamic}           OPTIONAL,   -- Cond twoPUCCHgroup
        p-NR-FR2-r16                                              P-Max                                     OPTIONAL,   -- Need R
        p-UE-FR2-r16                                              P-Max                                     OPTIONAL,   -- Cond MCG-Only
        nrdc-PCmode-FR1-r16                ENUMERATED {semi-static-mode1, semi-static-mode2, dynamic}       OPTIONAL,   -- Cond MCG-Only
        nrdc-PCmode-FR2-r16                ENUMERATED {semi-static-mode1, semi-static-mode2, dynamic}       OPTIONAL,   -- Cond MCG-Only
        pdsch-HARQ-ACK-Codebook-r16            ENUMERATED {enhancedDynamic}                                 OPTIONAL,   -- Need R
        nfi-TotalDAI-Included-r16              ENUMERATED {true}                                            OPTIONAL,   -- Need R
        ul-TotalDAI-Included-r16               ENUMERATED {true}                                            OPTIONAL,   -- Need R
        pdsch-HARQ-ACK-OneShotFeedback-r16     ENUMERATED {true}                                            OPTIONAL,   -- Need R
        pdsch-HARQ-ACK-OneShotFeedbackNDI-r16  ENUMERATED {true}                                            OPTIONAL,   -- Need R
        pdsch-HARQ-ACK-OneShotFeedbackCBG-r16  ENUMERATED {true}                                            OPTIONAL,   -- Need R
        downlinkAssignmentIndexDCI-0-2-r16     ENUMERATED { enabled }                                       OPTIONAL,   -- Need S
        downlinkAssignmentIndexDCI-1-2-r16     ENUMERATED {n1, n2, n4}                                      OPTIONAL,   -- Need S
        pdsch-HARQ-ACK-CodebookList-r16        SetupRelease {PDSCH-HARQ-ACK-CodebookList-r16}               OPTIONAL,   -- Need M
        ackNackFeedbackMode-r16                ENUMERATED {joint, separate}                                 OPTIONAL,   -- Need R
        pdcch-BlindDetectionCA-CombIndicator-r16 SetupRelease { PDCCH-BlindDetectionCA-CombIndicator-r16 }  OPTIONAL,   -- Need M
        pdcch-BlindDetection2-r16                SetupRelease { PDCCH-BlindDetection2-r16 }                 OPTIONAL,   -- Need M
        pdcch-BlindDetection3-r16                SetupRelease { PDCCH-BlindDetection3-r16 }                 OPTIONAL,   -- Need M
        bdFactorR-r16                          ENUMERATED {n1}                                              OPTIONAL    -- Need R
    ]],
    [[
        -- start of enhanced Type3 feedback
        pdsch-HARQ-ACK-EnhType3ToAddModList-r17   SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3-r17
        OPTIONAL,   -- Need N
        pdsch-HARQ-ACK-EnhType3ToReleaseList-r17  SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3Index-r17
        OPTIONAL,    -- Need N
        pdsch-HARQ-ACK-EnhType3SecondaryToAddModList-r17   SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3-r17
        OPTIONAL,    -- Need N
        pdsch-HARQ-ACK-EnhType3SecondaryToReleaseList-r17  SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3Index-r17
        OPTIONAL,    -- Need N
        pdsch-HARQ-ACK-EnhType3DCI-FieldSecondaryPUCCHgroup-r17 ENUMERATED {enabled}                        OPTIONAL,   -- Cond twoPUCCHgroup
        pdsch-HARQ-ACK-EnhType3DCI-Field-r17                ENUMERATED {enabled}                            OPTIONAL,   -- Need R
        -- end of enhanced Type3 feedback
        -- start of triggering of HARQ-ACK re-transmission on a PUCCH resource
        pdsch-HARQ-ACK-Retx-r17                   ENUMERATED {enabled}                                      OPTIONAL,   -- Need R
        pdsch-HARQ-ACK-RetxSecondaryPUCCHgroup-r17  ENUMERATED {enabled}                                    OPTIONAL,   -- Cond twoPUCCHgroup
        -- end of triggering of HARQ-ACK re-transmission on a PUCCH resource
        -- start of PUCCH Cell switching
        pucch-sSCell-r17                         SCellIndex                                                    OPTIONAL,   -- Need R
        pucch-sSCellSecondaryPUCCHgroup-r17      SCellIndex                                                    OPTIONAL,   -- Cond twoPUCCHgroup
        pucch-sSCellDyn-r17                      ENUMERATED {enabled}                                       OPTIONAL,   -- Need R
        pucch-sSCellDynSecondaryPUCCHgroup-r17   ENUMERATED {enabled}                                       OPTIONAL,   -- Cond twoPUCCHgroup
        pucch-sSCellPattern-r17                      SEQUENCE (SIZE(1..maxNrofSlots)) OF INTEGER (0..1)        OPTIONAL,   -- Need R
        pucch-sSCellPatternSecondaryPUCCHgroup-r17   SEQUENCE (SIZE(1..maxNrofSlots)) OF INTEGER (0..1)        OPTIONAL,   -- Cond twoPUCCHgroup
        -- end of PUCCH Cell switching
        uci-MuxWithDiffPrio-r17           ENUMERATED {enabled}                                      OPTIONAL,   -- Need R
        uci-MuxWithDiffPrioSecondaryPUCCHgroup-r17     ENUMERATED {enabled}                         OPTIONAL,   -- Cond twoPUCCHgroup
        simultaneousPUCCH-PUSCH-r17       ENUMERATED {enabled}                                      OPTIONAL,   -- Need R
        simultaneousPUCCH-PUSCH-SecondaryPUCCHgroup-r17       ENUMERATED {enabled}                  OPTIONAL,   -- Cond twoPUCCHgroup
        prioLowDG-HighCG-r17              ENUMERATED {enabled}                                      OPTIONAL,   -- Need R
        prioHighDG-LowCG-r17              ENUMERATED {enabled}                                      OPTIONAL,   -- Need R
        twoQCLTypeDforPDCCHRepetition-r17 ENUMERATED {enabled}                                      OPTIONAL,   -- Need R
        multicastConfig-r17               SetupRelease { MulticastConfig-r17 }                      OPTIONAL,   -- Need M
        pdcch-BlindDetectionCA-CombIndicator-r17 SetupRelease { PDCCH-BlindDetectionCA-CombIndicator-r17 }  OPTIONAL   -- Need M
    ]],
    [[
        simultaneousSR-PUSCH-diffPUCCH-Groups-r17      ENUMERATED {enabled}                         OPTIONAL    -- Cond twoPUCCHgroup
    ]],
    [[
        intraBandNC-PRACH-simulTx-r17     ENUMERATED {enabled}                                      OPTIONAL    -- Need R
    ]],
    [[
        pdcch-BlindDetection4-r17         SetupRelease { PDCCH-BlindDetection4-r17 }                OPTIONAL    -- Need M
    ]],
    [[
        simultaneousPUCCH-PUSCH-SamePriority-r17       ENUMERATED {enabled}                         OPTIONAL,   -- Need R
        simultaneousPUCCH-PUSCH-SamePriority-SecondaryPUCCHgroup-r17       ENUMERATED {enabled}     OPTIONAL    -- Cond twoPUCCHgroup
    ]],
    [[
        ncr-RNTI-r18                      RNTI-Value                                                OPTIONAL,   -- Cond NCR
        cellDTRX-DCI-config-r18           SetupRelease { CellDTRX-DCI-config-r18 }                  OPTIONAL,   -- Need M
        twoQCL-TypeD-ForMultiDCI-r18      ENUMERATED {enabled}                                      OPTIONAL,   -- Need R
        enableType1HARQ-ACK-MuxForDL-AssignmentAfterUL-Grant-r18           ENUMERATED {enabled}     OPTIONAL,   -- Need R
        enableType2HARQ-ACK-MuxForDL-AssignmentAfterUL-Grant-r18           ENUMERATED {enabled}     OPTIONAL,   -- Need R
        enableType3HARQ-ACK-MuxForDL-AssignmentAfterUL-Grant-r18           ENUMERATED {enabled}     OPTIONAL,   -- Need R
        enableDiffPUCCH-Resource-r18                                       ENUMERATED {enabled}     OPTIONAL,   -- Need R
        enableDiffCB-Size-r18                                              ENUMERATED {enabled}     OPTIONAL    -- Need R
    ]],
    [[
        lpwus-Config-r19                           SetupRelease { LPWUS-Config-r19 }                OPTIONAL,   -- Need M
        adaptSSB-PeriodicityIndication-RNTI-r19    SetupRelease {RNTI-Value}                        OPTIONAL,   -- Need M
        adaptSSB-SizeDCI-2-9-r19                   SetupRelease {SizeDCI-2-9-r19}                   OPTIONAL    -- Need M
    ]]
}

Candidate change requests of v19.1.0

The CRs whose title or cover names this change, strong and likely matches only.

Fields (74)

FieldDescription
harq-ACK-SpatialBundlingPUCCH
ENUMERATED {true} · OPTIONAL Need S
since v15.1.0
Enables spatial bundling of HARQ ACKs. It is configured per cell group (i.e. for all the cells within the cell group) for PUCCH reporting of HARQ-ACK. It is only applicable when more than 4 layers are possible to schedule. When the field is absent, the spatial bundling of PUCCH HARQ ACKs for the primary PUCCH group is disabled (see TS 38.213 [13], clause 9.1.2.1). If the field harq-ACK-SpatialBundlingPUCCH-secondaryPUCCHgroup is present, harq-ACK-SpatialBundlingPUCCH is only applied to primary PUCCH group. Network does not configure for a UE both spatial bundling of HARQ ACKs and codeBlockGroupTransmission within the same cell group.
harq-ACK-SpatialBundlingPUSCH
ENUMERATED {true} · OPTIONAL Need S
since v15.1.0
Enables spatial bundling of HARQ ACKs. It is configured per cell group (i.e. for all the cells within the cell group) for PUSCH reporting of HARQ-ACK. It is only applicable when more than 4 layers are possible to schedule. When the field is absent, the spatial bundling of PUSCH HARQ ACKs for the primary PUCCH group is disabled (see TS 38.213 [13], clauses 9.1.2.2 and 9.1.3.2). If the field harq-ACK-SpatialBundlingPUSCH-secondaryPUCCHgroup is present, harq-ACK-SpatialBundlingPUSCH is only applied to primary PUCCH group. Network does not configure for a UE both spatial bundling of HARQ ACKs and codeBlockGroupTransmission within the same cell group.
p-NR-FR1
P-Max · OPTIONAL Need R
since v15.3.0
The maximum total transmit power to be used by the UE in this NR cell group across all serving cells in frequency range 1 (FR1). The maximum transmit power that the UE may use may be additionally limited by p-Max (configured in FrequencyInfoUL ) and by p-UE-FR1 (configured total for all serving cells operating on FR1).
pdsch-HARQ-ACK-Codebook
ENUMERATED {semiStatic, dynamic}
since v15.1.0
The PDSCH HARQ-ACK codebook is either semi-static or dynamic. This is applicable to both CA and non-CA operation (see TS 38.213 [13], clauses 9.1.2 and 9.1.3). If pdsch-HARQ-ACK-Codebook-r16 is signalled, UE shall ignore the pdsch-HARQ-ACK-Codebook (without suffix). For the HARQ-ACK for sidelink, if pdsch-HARQ-ACK-Codebook-r16 is signalled, the UE uses pdsch-HARQ-ACK-Codebook (without suffix) and ignores pdsch-HARQ-ACK-Codebook-r16 . If the field pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup is present, pdsch-HARQ-ACK-Codebook is applied to primary PUCCH group. Otherwise, this field is applied to the cell group (i.e. for all the cells within the cell group). For the HARQ-ACK for sidelink, if the field pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup is present, pdsch-HARQ-ACK-Codebook is applied to primary and secondary PUCCH group and the UE ignores pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup .
tpc-SRS-RNTI
RNTI-Value · OPTIONAL Need R
since v15.1.0
RNTI used for SRS TPC commands on DCI (see TS 38.213 [13], clause 10.1).
tpc-PUCCH-RNTI
RNTI-Value · OPTIONAL Need R
since v15.1.0
RNTI used for PUCCH TPC commands on DCI (see TS 38.213 [13], clause 10.1).
tpc-PUSCH-RNTI
RNTI-Value · OPTIONAL Need R
since v15.1.0
RNTI used for PUSCH TPC commands on DCI (see TS 38.213 [13], clause 10.1).
sp-CSI-RNTI
RNTI-Value · OPTIONAL Need R
since v15.2.0
RNTI for Semi-Persistent CSI reporting on PUSCH (see CSI-ReportConfig ) (see TS 38.214 [19], clause 5.2.1.5.2). Network always configures the UE with a value for this field when at least one CSI-ReportConfig with reportConfigType set to semiPersistentOnPUSCH is configured.
cs-RNTI
SetupRelease { RNTI-Value } · OPTIONAL Need M
since v15.2.0
RNTI value for downlink SPS (see SPS-Config ) and uplink configured grant (see ConfiguredGrantConfig ).
mcs-C-RNTI
RNTI-Value · OPTIONAL Need R
since v15.3.0
RNTI to indicate use of qam64LowSE for grant-based transmissions. When the mcs - C-RNTI is configured, RNTI scrambling of DCI CRC is used to choose the corresponding MCS table.
p-UE-FR1
P-Max · OPTIONAL Cond MCG-Only
since v15.3.0
The maximum total transmit power to be used by the UE across all serving cells in frequency range 1 (FR1) across all cell groups. The maximum transmit power that the UE may use may be additionally limited by p-Max (configured in FrequencyInfoUL ) and by p-NR-FR1 (configured for the cell group).
xScale
ENUMERATED {dB0, dB6, spare2, spare1} · OPTIONAL Cond SCG-Only
since v15.4.0
The UE is allowed to drop NR only if the power scaling applied to NR results in a difference between scaled and unscaled NR UL of more than xScale dB (see TS 38.213 [13]). If the value is not configured for dynamic power sharing, the UE assumes default value of 6 dB.
pdcch-BlindDetection
SetupRelease { PDCCH-BlindDetection } · OPTIONAL Need M
since v15.6.0
Indicates the reference number of cells for PDCCH blind detection for the CG. Network configures the field for each CG when the UE is in NR DC and sets the value in accordance with the constraints specified in TS 38.213 [13]. The network configures pdcch-BlindDetection only if the UE is in NR-DC. The network configures pdcch-BlindDetection2 only if the UE is in NR-DC with at least one downlink cell using Rel-16 PDCCH monitoring capability. The network configures pdcch-BlindDetection3 only if the UE is in NR-DC with at least one downlink cell using Rel-15 PDCCH monitoring capability. The network configures pdcch-BlindDetection4 only if the UE is in NR-DC with at least one downlink cell using Rel-17 PDCCH monitoring capability.
dcp-Config-r16
SetupRelease { DCP-Config-r16 } · OPTIONAL Need M
since v16.0.0
harq-ACK-SpatialBundlingPUCCH-secondaryPUCCHgroup-r16
ENUMERATED {enabled, disabled} · OPTIONAL Cond twoPUCCHgroup
since v16.2.0
Indicates whether spatial bundling of PUCCH HARQ ACKs for the secondary PUCCH group is enabled or disabled. The field is only applicable when more than 4 layers are possible to schedule (see TS 38.213 [13], clause 9.1.2.1). When the field is absent, the use of spatial bundling of PUCCH HARQ ACKs for the secondary PUCCH group is indicated by harq-ACK-SpatialBundlingPUCCH . See TS 38.213 [13], clause 9.1.2.1. Network does not configure for a UE both spatial bundling of HARQ ACKs and codeBlockGroupTransmission within the same cell group.
harq-ACK-SpatialBundlingPUSCH-secondaryPUCCHgroup-r16
ENUMERATED {enabled, disabled} · OPTIONAL Cond twoPUCCHgroup
since v16.2.0
Indicates whether spatial bundling of PUSCH HARQ ACKs for the secondary PUCCH group is enabled or disabled. The field is only applicable when more than 4 layers are possible to schedule (see TS 38.213 [13], clauses 9.1.2.2 and 9.1.3.2). When the field is absent, the use of spatial bundling of PUSCH HARQ ACKs for the secondary PUCCH group is indicated by harq-ACK-SpatialBundlingPUSCH . See TS 38.213 [13], clauses 9.1.2.2 and 9.1.3.2. Network does not configure for a UE both spatial bundling of HARQ ACKs and codeBlockGroupTransmission within the same cell group.
pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup-r16
ENUMERATED {semiStatic, dynamic} · OPTIONAL Cond twoPUCCHgroup
since v16.2.0
The PDSCH HARQ-ACK codebook is either semi-static or dynamic. This is applicable to CA operation (see TS 38.213 [13], clauses 9.1.2 and 9.1.3). It is configured for secondary PUCCH group .
p-NR-FR2-r16
P-Max · OPTIONAL Need R
since v16.0.0
The maximum total transmit power to be used by the UE in this NR cell group across all serving cells in frequency range 2 (FR2). The maximum transmit power that the UE may use may be additionally limited by p-Max (configured in FrequencyInfoUL ) and by p-UE-FR2 (configured total for all serving cells operating on FR2). This field is only used in NR-DC. A UE does not expect to be configured with this parameter in this release of the specification.
p-UE-FR2-r16
P-Max · OPTIONAL Cond MCG-Only
since v16.0.0
The maximum total transmit power to be used by the UE across all serving cells in frequency range 2 (FR2) across all cell groups. The maximum transmit power that the UE may use may be additionally limited by p-Max (configured in FrequencyInfoUL ) and by p-NR-FR2 (configured for the cell group). A UE does not expect to be configured with this parameter in this release of the specification.
nrdc-PCmode-FR1-r16
ENUMERATED {semi-static-mode1, semi-static-mode2, dynamic} · OPTIONAL Cond MCG-Only
since v16.0.0
Indicates the uplink power sharing mode that the UE uses in NR-DC in frequency range 1 (FR1) (see TS 38.213 [13], clause 7.6).
nrdc-PCmode-FR2-r16
ENUMERATED {semi-static-mode1, semi-static-mode2, dynamic} · OPTIONAL Cond MCG-Only
since v16.0.0
Indicates the uplink power sharing mode that the UE uses in NR-DC in frequency range 2 (FR2) (see TS 38.213 [13], clause 7.6).
pdsch-HARQ-ACK-Codebook-r16
ENUMERATED {enhancedDynamic} · OPTIONAL Need R
since v16.0.0
The PDSCH HARQ-ACK codebook is either semi-static or dynamic. This is applicable to both CA and non-CA operation (see TS 38.213 [13], clauses 9.1.2 and 9.1.3). If pdsch-HARQ-ACK-Codebook-r16 is signalled, UE shall ignore the pdsch-HARQ-ACK-Codebook (without suffix). For the HARQ-ACK for sidelink, if pdsch-HARQ-ACK-Codebook-r16 is signalled, the UE uses pdsch-HARQ-ACK-Codebook (without suffix) and ignores pdsch-HARQ-ACK-Codebook-r16 . If the field pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup is present, pdsch-HARQ-ACK-Codebook is applied to primary PUCCH group. Otherwise, this field is applied to the cell group (i.e. for all the cells within the cell group). For the HARQ-ACK for sidelink, if the field pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup is present, pdsch-HARQ-ACK-Codebook is applied to primary and secondary PUCCH group and the UE ignores pdsch-HARQ-ACK-Codebook-secondaryPUCCHgroup .
nfi-TotalDAI-Included-r16
ENUMERATED {true} · OPTIONAL Need R
since v16.0.0
Indicates whether the NFI and total DAI fields of the non-scheduled PDSCH group is included in the non-fallback DL grant DCI (see TS 38.212 [17], clause 7.3.1). The network configures this only when enhanced dynamic codebook is configured ( pdsch-HARQ-ACK-Codebook is set to enhancedDynamic ).
ul-TotalDAI-Included-r16
ENUMERATED {true} · OPTIONAL Need R
since v16.0.0
Indicates whether the total DAI fields of the additional PDSCH group is included in the non-fallback UL grant DCI (see TS 38.212 [17], clause 7.3.1). The network configures this only when enhanced dynamic codebook is configured ( pdsch-HARQ-ACK-Codebook is set to enhancedDynamic ).
pdsch-HARQ-ACK-OneShotFeedback-r16
ENUMERATED {true} · OPTIONAL Need R
since v16.0.0
When configured, the DCI format 1_1 can request the UE to report A/N for all HARQ processes and all CCs configured in the PUCCH group (see TS 38.212 [17], clause 7.3.1).
pdsch-HARQ-ACK-OneShotFeedbackNDI-r16
ENUMERATED {true} · OPTIONAL Need R
since v16.0.0
When configured, the DCI format 1_1 can request the UE to include NDI for each A/N reported. The network configures this only when pdsch-HARQ-ACK-OneShotFeedback is configured.
pdsch-HARQ-ACK-OneShotFeedbackCBG-r16
ENUMERATED {true} · OPTIONAL Need R
since v16.0.0
When configured, the DCI format 1_1 can request the UE to include CBG level A/N for each CC with CBG level transmission configured. When not configured, the UE will report TB level A/N even if CBG level transmission is configured for a CC. The network configures this only when pdsch-HARQ-ACK-OneShotFeedback is configured.
downlinkAssignmentIndexDCI-0-2-r16
ENUMERATED { enabled } · OPTIONAL Need S
since v16.2.0
Indicates if "Downlink assignment index" is present or absent in DCI format 0_2. If the field " downlinkAssignmentIndexDCI-0-2 " is absent, then 0 bit for "Downlink assignment index" in DCI format 0_2. If the field " downlinkAssignmentIndexDCI-0-2 " is present, then the bitwidth of "Downlink assignment index" in DCI format 0_2 is defined in the same was as that in DCI format 0_1 (see TS 38.212 [17], clause 7.3.1 and TS 38.213 [13], clause 9.1).
downlinkAssignmentIndexDCI-1-2-r16
ENUMERATED {n1, n2, n4} · OPTIONAL Need S
since v16.2.0
Configures the number of bits for "Downlink assignment index" in DCI format 1_2. If the field is absent, then 0 bit is applied for "Downlink assignment index" in DCI format 1_2. Note that 1 bit and 2 bits are applied if only one serving cell is configured in the DL and pdsch-HARQ-ACK-Codebook is set to dynamic . 4 bits is applied if more than one serving cell are configured in the DL and pdsch-HARQ-ACK-Codebook is set to dynamic (see TS 38.212 [17], clause 7.3.1 and TS 38.213 [13], clause 9.1).
pdsch-HARQ-ACK-CodebookList-r16
SetupRelease {PDSCH-HARQ-ACK-CodebookList-r16} · OPTIONAL Need M
since v16.0.0
A list of configurations for one or two HARQ-ACK codebooks. Each configuration in the list is defined in the same way as pdsch-HARQ-ACK-Codebook (see TS 38.212 [17], clause 7.3.1.2.2 and TS 38.213 [13], clauses 7.2.1, 9.1.2, 9.1.3 and 9.2.1). If this field is present, the field pdsch-HARQ-ACK-Codebook is ignored. If this field is present, the value of this field is applied for primary PUCCH group and for secondary PUCCH group (if configured). For the HARQ-ACK for sidelink, the UE uses pdsch-HARQ-ACK-Codebook and ignores pdsch-HARQ-ACK-CodebookList if this field is present.
ackNackFeedbackMode-r16
ENUMERATED {joint, separate} · OPTIONAL Need R
since v16.0.0
Indicates which among the joint and separate ACK/NACK feedback modes to use within a slot as specified in TS 38.213 [13] (clause 9).
pdcch-BlindDetectionCA-CombIndicator-r16
SetupRelease { PDCCH-BlindDetectionCA-CombIndicator-r16 } · OPTIONAL Need M
since v16.1.0
Configure one combination of pdcch-BlindDetectionCA1 (for R15) and pdcch-BlindDetectionCA2 (for R16) for UE to use for scaling PDCCH monitoring capability if the number of serving cells configured to a UE is larger than the reported capability, and if UE reports more than one combination of pdcch-BlindDetectionCA1 and pdcch-BlindDetectionCA2 as UE capability. The combination of pdcch-BlindDetectionCA1 and pdcch-BlindDetectionCA2 configured by pdcch-BlindDetectionCA-CombIndicator is from the more than one combination of pdcch-BlindDetectionCA1 and pdcch-BlindDetectionCA2 reported by UE (see TS 38.213 [13], clause 10). pdcch-BlindDetectionCA-CombIndicator-r17 is used to configure one combination of pdcch-BlindDetectionCA1 (for R15), pdcch-BlindDetectionCA2 (for R16) and pdcch-BlindDetectionCA3 (for R17) for UE to use for scaling PDCCH monitoring capability if the number of serving cells configured to a UE is larger than the reported capability, and if UE reports more than one combination of pdcch-BlindDetectionCA1 , pdcch-BlindDetectionCA2 and pdcch-BlindDetectionCA3 as UE capability. The combination of pdcch-BlindDetectionCA1 , pdcch-BlindDetectionCA2 and pdcch-BlindDetectionCA3 configured by pdcch-BlindDetectionCA-CombIndicator-r17 is from the more than one combination of pdcch-BlindDetectionCA1 , pdcch-BlindDetectionCA2 and pdcch-BlindDetectionCA3 reported by UE (see TS 38.213 [13], clause 10). pdcch-BlindDetectionCA-CombIndicator-r16 and pdcch-BlindDetectionCA-CombIndicator-r17 are not configured simultaneously.
pdcch-BlindDetection2-r16
SetupRelease { PDCCH-BlindDetection2-r16 } · OPTIONAL Need M
since v16.1.0
Indicates the reference number of cells for PDCCH blind detection for the CG. Network configures the field for each CG when the UE is in NR DC and sets the value in accordance with the constraints specified in TS 38.213 [13]. The network configures pdcch-BlindDetection only if the UE is in NR-DC. The network configures pdcch-BlindDetection2 only if the UE is in NR-DC with at least one downlink cell using Rel-16 PDCCH monitoring capability. The network configures pdcch-BlindDetection3 only if the UE is in NR-DC with at least one downlink cell using Rel-15 PDCCH monitoring capability. The network configures pdcch-BlindDetection4 only if the UE is in NR-DC with at least one downlink cell using Rel-17 PDCCH monitoring capability.
pdcch-BlindDetection3-r16
SetupRelease { PDCCH-BlindDetection3-r16 } · OPTIONAL Need M
since v16.1.0
Indicates the reference number of cells for PDCCH blind detection for the CG. Network configures the field for each CG when the UE is in NR DC and sets the value in accordance with the constraints specified in TS 38.213 [13]. The network configures pdcch-BlindDetection only if the UE is in NR-DC. The network configures pdcch-BlindDetection2 only if the UE is in NR-DC with at least one downlink cell using Rel-16 PDCCH monitoring capability. The network configures pdcch-BlindDetection3 only if the UE is in NR-DC with at least one downlink cell using Rel-15 PDCCH monitoring capability. The network configures pdcch-BlindDetection4 only if the UE is in NR-DC with at least one downlink cell using Rel-17 PDCCH monitoring capability.
bdFactorR-r16
ENUMERATED {n1} · OPTIONAL Need R
since v16.1.0
Parameter for determining and distributing the maximum numbers of BD/CCE for mPDCCH based mPDSCH transmission as specified in TS 38.213 [13] Clause 10.1.
pdsch-HARQ-ACK-EnhType3ToAddModList-r17
SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3-r17 · OPTIONAL Need N
since v17.0.0
Configure the list of enhanced Type 3 HARQ-ACK codebooks for the primary PUCCH group and the secondary PUCCH group, respectively. When configured, DCI format 1_1 can request the UE to report A/N for one of the configured enhanced Type 3 HARQ-ACK codebooks in the corresponding PUCCH group (see TS 38.213 [13], clause 9.1.4). The network can configure pdsch-HARQ-ACK-EnhType3SecondaryToAddModList only if secondary PUCCH group is configured.
pdsch-HARQ-ACK-EnhType3ToReleaseList-r17
SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3Index-r17 · OPTIONAL Need N
since v17.0.0
pdsch-HARQ-ACK-EnhType3SecondaryToAddModList-r17
SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3-r17 · OPTIONAL Need N
since v17.0.0
Configure the list of enhanced Type 3 HARQ-ACK codebooks for the primary PUCCH group and the secondary PUCCH group, respectively. When configured, DCI format 1_1 can request the UE to report A/N for one of the configured enhanced Type 3 HARQ-ACK codebooks in the corresponding PUCCH group (see TS 38.213 [13], clause 9.1.4). The network can configure pdsch-HARQ-ACK-EnhType3SecondaryToAddModList only if secondary PUCCH group is configured.
pdsch-HARQ-ACK-EnhType3SecondaryToReleaseList-r17
SEQUENCE (SIZE(1..maxNrofEnhType3HARQ-ACK-r17)) OF PDSCH-HARQ-ACK-EnhType3Index-r17 · OPTIONAL Need N
since v17.0.0
pdsch-HARQ-ACK-EnhType3DCI-FieldSecondaryPUCCHgroup-r17
ENUMERATED {enabled} · OPTIONAL Cond twoPUCCHgroup
since v17.1.0
Indicates the enhanced Type 3 codebook through a new DCI field to indicate the enhanced Type 3 HARQ-ACK codebook in the primary PUCCH group if the more than one enhanced Type 3 HARQ-ACK codebook is configured for the primary PUCCH group, or in the secondary PUCCH group if the more than one enhanced Type 3 HARQ-ACK code is configured for the secondary PUCCH group, respectively.
pdsch-HARQ-ACK-EnhType3DCI-Field-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
Indicates the enhanced Type 3 codebook through a new DCI field to indicate the enhanced Type 3 HARQ-ACK codebook in the primary PUCCH group if the more than one enhanced Type 3 HARQ-ACK codebook is configured for the primary PUCCH group, or in the secondary PUCCH group if the more than one enhanced Type 3 HARQ-ACK code is configured for the secondary PUCCH group, respectively.
pdsch-HARQ-ACK-Retx-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
When configured, the DCI format 1_1 can request the UE to perform a HARQ-ACK re-transmission on a PUCCH resource in the primary PUCCH group and the secondary PUCCH group, respectively (see TS 38.213 [13], clause 9.1.5).
pdsch-HARQ-ACK-RetxSecondaryPUCCHgroup-r17
ENUMERATED {enabled} · OPTIONAL Cond twoPUCCHgroup
since v17.0.0
When configured, the DCI format 1_1 can request the UE to perform a HARQ-ACK re-transmission on a PUCCH resource in the primary PUCCH group and the secondary PUCCH group, respectively (see TS 38.213 [13], clause 9.1.5).
pucch-sSCell-r17
SCellIndex · OPTIONAL Need R
since v17.0.0
indictates the alternative PUCCH cells for PUCCH cell switching in the primary and the secondary PUCCH group, respectively. For the primary PUCCH group, it is configured for cells on top of SpCell. For the secondary PUCCH group, it is configured for cell on top of the PUCCH SCell.
pucch-sSCellSecondaryPUCCHgroup-r17
SCellIndex · OPTIONAL Cond twoPUCCHgroup
since v17.0.0
indictates the alternative PUCCH cells for PUCCH cell switching in the primary and the secondary PUCCH group, respectively. For the primary PUCCH group, it is configured for cells on top of SpCell. For the secondary PUCCH group, it is configured for cell on top of the PUCCH SCell.
pucch-sSCellDyn-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
When configured, PUCCH cell switching based on dynamic indication in DCI format 1_1 is enabled (see TS 38.213 [13], clause 9.A, clause 9.1.5), respectively for the primary PUCCH group and the secondary PUCCH group.
pucch-sSCellDynSecondaryPUCCHgroup-r17
ENUMERATED {enabled} · OPTIONAL Cond twoPUCCHgroup
since v17.0.0
pucch-sSCellPattern-r17
SEQUENCE (SIZE(1..maxNrofSlots)) OF INTEGER (0..1) · OPTIONAL Need R
since v17.0.0
When configured, the UE applies the semi-static PUCCH cell switching (see TS 38.213 [13], clause 9.A) using the time domain pattern of applicable PUCCH cells indicated by this field, respectively for the primary PUCCH group and the secondary PUCCH group.
pucch-sSCellPatternSecondaryPUCCHgroup-r17
SEQUENCE (SIZE(1..maxNrofSlots)) OF INTEGER (0..1) · OPTIONAL Cond twoPUCCHgroup
since v17.0.0
When configured, the UE applies the semi-static PUCCH cell switching (see TS 38.213 [13], clause 9.A) using the time domain pattern of applicable PUCCH cells indicated by this field, respectively for the primary PUCCH group and the secondary PUCCH group.
uci-MuxWithDiffPrio-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
When configured, enables multiplexing a high-priority (HP) HARQ-ACK UCI and a low-priority (LP) HARQ-ACK UCI into a PUCCH or PUSCH for the primary PUCCH group and the secondary PUCCH group, respectively.
uci-MuxWithDiffPrioSecondaryPUCCHgroup-r17
ENUMERATED {enabled} · OPTIONAL Cond twoPUCCHgroup
since v17.0.0
simultaneousPUCCH-PUSCH-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
Enables simultaneous PUCCH and PUSCH transmissions with different priorities for the primary PUCCH group and the secondary PUCCH group, respectively.
simultaneousPUCCH-PUSCH-SecondaryPUCCHgroup-r17
ENUMERATED {enabled} · OPTIONAL Cond twoPUCCHgroup
since v17.0.0
Enables simultaneous PUCCH and PUSCH transmissions with different priorities for the primary PUCCH group and the secondary PUCCH group, respectively.
prioLowDG-HighCG-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
Enable PHY prioritization for the case where low-priority dynamic grant PUSCH collides with high-priority configured grant PUSCH on a BWP of a serving cell (see TS 38.213 [13], clause 9), when the UE has generated transport blocks for both DG-PUSCH and CG-PUSCH as described in TS 38.321 [3].
prioHighDG-LowCG-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
Enable PHY prioritization for the case where high-priority dynamic grant PUSCH collides with low-priority configured grant PUSCH on a BWP of a serving cell (see TS 38.213 [13], clause 9), when the UE has generated transport blocks for both DG-PUSCH and CG-PUSCH as described in TS 38.321 [3].
twoQCLTypeDforPDCCHRepetition-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.0.0
Indicates whether a UE is expected UE to identify and monitor two QCL-TypeD properties for multiple overlapping CORESETs in the case of PDCCH repetition.
multicastConfig-r17
SetupRelease { MulticastConfig-r17 } · OPTIONAL Need M
since v17.0.0
pdcch-BlindDetectionCA-CombIndicator-r17
SetupRelease { PDCCH-BlindDetectionCA-CombIndicator-r17 } · OPTIONAL Need M
since v17.1.0
Configure one combination of pdcch-BlindDetectionCA1 (for R15) and pdcch-BlindDetectionCA2 (for R16) for UE to use for scaling PDCCH monitoring capability if the number of serving cells configured to a UE is larger than the reported capability, and if UE reports more than one combination of pdcch-BlindDetectionCA1 and pdcch-BlindDetectionCA2 as UE capability. The combination of pdcch-BlindDetectionCA1 and pdcch-BlindDetectionCA2 configured by pdcch-BlindDetectionCA-CombIndicator is from the more than one combination of pdcch-BlindDetectionCA1 and pdcch-BlindDetectionCA2 reported by UE (see TS 38.213 [13], clause 10). pdcch-BlindDetectionCA-CombIndicator-r17 is used to configure one combination of pdcch-BlindDetectionCA1 (for R15), pdcch-BlindDetectionCA2 (for R16) and pdcch-BlindDetectionCA3 (for R17) for UE to use for scaling PDCCH monitoring capability if the number of serving cells configured to a UE is larger than the reported capability, and if UE reports more than one combination of pdcch-BlindDetectionCA1 , pdcch-BlindDetectionCA2 and pdcch-BlindDetectionCA3 as UE capability. The combination of pdcch-BlindDetectionCA1 , pdcch-BlindDetectionCA2 and pdcch-BlindDetectionCA3 configured by pdcch-BlindDetectionCA-CombIndicator-r17 is from the more than one combination of pdcch-BlindDetectionCA1 , pdcch-BlindDetectionCA2 and pdcch-BlindDetectionCA3 reported by UE (see TS 38.213 [13], clause 10). pdcch-BlindDetectionCA-CombIndicator-r16 and pdcch-BlindDetectionCA-CombIndicator-r17 are not configured simultaneously.
simultaneousSR-PUSCH-diffPUCCH-Groups-r17
ENUMERATED {enabled} · OPTIONAL Cond twoPUCCHgroup
since v17.2.0
Enables simultaneous SR and PUSCH transmissions in different PUCCH groups (see TS 38.321 [3], clause 5.4.1, clause 5.4.4).
intraBandNC-PRACH-simulTx-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.3.0
Enables parallel PRACH and SRS/PUCCH/PUSCH transmissions across CCs in intra-band non-contiguous CA (see TS 38.213 [13], clause 8.1 and TS 38.214 [19], clause 6.2.1). This field is absent in the IE CellGroupConfig when provided as part of RRCSetup message.
pdcch-BlindDetection4-r17
SetupRelease { PDCCH-BlindDetection4-r17 } · OPTIONAL Need M
since v17.5.0
Indicates the reference number of cells for PDCCH blind detection for the CG. Network configures the field for each CG when the UE is in NR DC and sets the value in accordance with the constraints specified in TS 38.213 [13]. The network configures pdcch-BlindDetection only if the UE is in NR-DC. The network configures pdcch-BlindDetection2 only if the UE is in NR-DC with at least one downlink cell using Rel-16 PDCCH monitoring capability. The network configures pdcch-BlindDetection3 only if the UE is in NR-DC with at least one downlink cell using Rel-15 PDCCH monitoring capability. The network configures pdcch-BlindDetection4 only if the UE is in NR-DC with at least one downlink cell using Rel-17 PDCCH monitoring capability.
simultaneousPUCCH-PUSCH-SamePriority-r17
ENUMERATED {enabled} · OPTIONAL Need R
since v17.7.0
Enables simultaneous PUCCH and PUSCH transmissions on different cells in different bands with same priority for the primary PUCCH group and the secondary PUCCH group, respectively, as specified in clause 9 of TS 38.213 [13].
simultaneousPUCCH-PUSCH-SamePriority-SecondaryPUCCHgroup-r17
ENUMERATED {enabled} · OPTIONAL Cond twoPUCCHgroup
since v17.7.0
Enables simultaneous PUCCH and PUSCH transmissions on different cells in different bands with same priority for the primary PUCCH group and the secondary PUCCH group, respectively, as specified in clause 9 of TS 38.213 [13].
ncr-RNTI-r18
RNTI-Value · OPTIONAL Cond NCR
since v18.0.0
RNTI value for NCR-MT, used to scramble the PDCCHs carrying side control information (see TS 38.213 [13], clause 10.1).
cellDTRX-DCI-config-r18
SetupRelease { CellDTRX-DCI-config-r18 } · OPTIONAL Need M
since v18.0.0
twoQCL-TypeD-ForMultiDCI-r18
ENUMERATED {enabled} · OPTIONAL Need R
since v18.1.0
Indicates whether a UE is expected to identify and monitor two QCL-TypeD properties for multiple overlapping CORESETs, where the first QCL-TypeD is associated with coresetPoolIndex value 0, and the second QCL-TypeD is associated with coresetPoolIndex value 1. (See TS 38,213 [13], clause 10).
enableType1HARQ-ACK-MuxForDL-AssignmentAfterUL-Grant-r18
ENUMERATED {enabled} · OPTIONAL Need R
since v18.1.0
If enabled, UE multiplexes Type-1 HARQ-ACK codebook on a repetition of a PUSCH transmission other than a first repetition, where the HARQ-ACK codebook includes HARQ-ACK information associated with PDSCH reception(s) scheduled after the UL grant scheduling the PUSCH transmission. See clause 9 in TS 38.213 [13]. This feature is not simultaneously enabled with PUCCH cell switching.
enableType2HARQ-ACK-MuxForDL-AssignmentAfterUL-Grant-r18
ENUMERATED {enabled} · OPTIONAL Need R
since v18.1.0
If enabled, UE multiplexes Type-2 HARQ-ACK codebook on a repetition of a PUSCH transmission other than a first repetition, where the HARQ-ACK codebook includes HARQ-ACK information associated with PDSCH reception(s) scheduled after the UL grant scheduling the PUSCH transmission. See clause 9 in TS 38.213 [13]. This feature is not simultaneously enabled with PUCCH cell switching.
enableType3HARQ-ACK-MuxForDL-AssignmentAfterUL-Grant-r18
ENUMERATED {enabled} · OPTIONAL Need R
since v18.1.0
If enabled, UE multiplexes Type-3 HARQ-ACK codebook on a repetition of a PUSCH transmission other than a first repetition, where the HARQ-ACK codebook includes HARQ-ACK information associated with PDSCH reception(s) scheduled after the UL grant scheduling the PUSCH transmission. See clause 9 in TS 38.213 [13]. This feature is not simultaneously enabled with PUCCH cell switching.
enableDiffPUCCH-Resource-r18
ENUMERATED {enabled} · OPTIONAL Need R
since v18.1.0
This field indicates whether a different PUCCH resource in time domain in a slot from the PUCCH resource indicated by the last DCI format before a UL grant in the slot, is determined or not to include HARQ-ACK information associated with PDSCH reception(s) scheduled after a UL grant scheduling a PUSCH transmission with repetitions and the HARQ-ACK information are multiplexed on a repetition of the PUSCH transmission other than a first repetition in the same slot. If enabled, a different PUCCH resource in time domain might be determined. See clause 9 in TS 38.213 [13].
enableDiffCB-Size-r18
ENUMERATED {enabled} · OPTIONAL Need R
since v18.1.0
This field indicates whether a different codebook size from the size determined based on HARQ-ACK information associated with PDSCH reception(s) scheduled before a UL grant, is determined or not to include HARQ-ACK information associated with PDSCH reception(s) scheduled after a UL grant scheduling a PUSCH transmission with repetitions and the HARQ-ACK information are multiplexed on a repetition of the PUSCH transmission other than a first repetition. If enabled, a different HARQ codebook size might be determined. See clause 9 in TS 38.213 [13].
lpwus-Config-r19
SetupRelease { LPWUS-Config-r19 } · OPTIONAL Need M
since v19.0.0
Configuration for UE to use LP-WUS on PCell and/or PSCell to control the PDCCH monitoring as specified in TS 38.321 [3] Clause 5.7. The network will not configure lpwus-Config and dcp-Config for a UE simultaneously.
adaptSSB-PeriodicityIndication-RNTI-r19
SetupRelease {RNTI-Value} · OPTIONAL Need M
since v19.1.0
The RNTI value for scrambling CRC of DCI format 2_9 for SSB burst periodicity switching for Scell(s).
adaptSSB-SizeDCI-2-9-r19
SetupRelease {SizeDCI-2-9-r19} · OPTIONAL Need M
since v19.1.0
The size of DCI format 2_9 for SSB burst periodicity switching (see TS 38.212 [17], clause 7.3.1.3.10).

Used by (1)

Uses (20)

In the viewer