specviewer.org TS 38.331 ASN.1 index SIB2

SIB2

RRC IE · TS 38.331 v19.4.0 (2026-09) · clause 6.3.1

SIB2 is an RRC information element of 3GPP TS 38.331 (38331), the 5G NR Radio Resource Control (RRC) protocol.

First seen v15.3.0 (2018-09) · Last changed v19.4.0 (2026-09)

Definition

SIB2 contains cell re-selection information common for intra-frequency, inter-frequency and/or inter-RAT cell re-selection (i.e. applicable for more than one type of cell re-selection but not necessarily all) as well as intra-frequency cell re-selection information other than neighbouring cell related.

SIB2 ::=                            SEQUENCE {
    cellReselectionInfoCommon           SEQUENCE {
        nrofSS-BlocksToAverage              INTEGER (2..maxNrofSS-BlocksToAverage)          OPTIONAL,       -- Need S
        absThreshSS-BlocksConsolidation     ThresholdNR                                     OPTIONAL,       -- Need S
        rangeToBestCell                     RangeToBestCell                                 OPTIONAL,       -- Need R
        q-Hyst                              ENUMERATED {
            dB0, dB1, dB2, dB3, dB4, dB5, dB6, dB8, dB10,
            dB12, dB14, dB16, dB18, dB20, dB22, dB24},
        speedStateReselectionPars           SEQUENCE {
            mobilityStateParameters             MobilityStateParameters,
            q-HystSF                        SEQUENCE {
                sf-Medium                       ENUMERATED {dB-6, dB-4, dB-2, dB0},
                sf-High                         ENUMERATED {dB-6, dB-4, dB-2, dB0}
            }
        }                                                                                   OPTIONAL,       -- Need R
        ...
    },
    cellReselectionServingFreqInfo      SEQUENCE {
        s-NonIntraSearchP                   ReselectionThreshold                            OPTIONAL,       -- Need S
        s-NonIntraSearchQ                   ReselectionThresholdQ                           OPTIONAL,       -- Need S
        threshServingLowP                   ReselectionThreshold,
        threshServingLowQ                   ReselectionThresholdQ                           OPTIONAL,       -- Need R
        cellReselectionPriority             CellReselectionPriority,
        cellReselectionSubPriority          CellReselectionSubPriority                      OPTIONAL,       -- Need R
        ...,
        [[
            od-SIB1-CellReselectionPriority-r19             CellReselectionPriority             OPTIONAL,       -- Need R
            od-SIB1-CellReselectionSubPriority-r19          CellReselectionSubPriority          OPTIONAL        -- Need R
        ]]
    },
    intraFreqCellReselectionInfo        SEQUENCE {
        q-RxLevMin                          Q-RxLevMin,
        q-RxLevMinSUL                       Q-RxLevMin                                      OPTIONAL,       -- Need R
        q-QualMin                           Q-QualMin                                       OPTIONAL,       -- Need S
        s-IntraSearchP                      ReselectionThreshold,
        s-IntraSearchQ                      ReselectionThresholdQ                           OPTIONAL,       -- Need S
        t-ReselectionNR                     T-Reselection,
        frequencyBandList                   MultiFrequencyBandListNR-SIB                    OPTIONAL,       -- Need S
        frequencyBandListSUL                MultiFrequencyBandListNR-SIB                    OPTIONAL,       -- Need R
        p-Max                               P-Max                                           OPTIONAL,       -- Need S
        smtc                                SSB-MTC                                         OPTIONAL,       -- Need S
        ss-RSSI-Measurement                 SS-RSSI-Measurement                             OPTIONAL,       -- Need R
        ssb-ToMeasure                       SSB-ToMeasure                                   OPTIONAL,       -- Need S
        deriveSSB-IndexFromCell             BOOLEAN,
        ...,
        [[
            t-ReselectionNR-SF                  SpeedStateScaleFactors                          OPTIONAL        -- Need R
        ]],
        [[
            smtc2-LP-r16                        SSB-MTC2-LP-r16                                 OPTIONAL,        -- Need R
            ssb-PositionQCL-Common-r16          SSB-PositionQCL-Relation-r16                    OPTIONAL         -- Cond SharedSpectrum
        ]],
        [[
            ssb-PositionQCL-Common-r17          SSB-PositionQCL-Relation-r17                    OPTIONAL         -- Cond SharedSpectrum2
        ]],
        [[
            smtc4list-r17                       SSB-MTC4List-r17                                OPTIONAL         -- Need R
        ]],
        [[
            frequencyBandList-v1760             MultiFrequencyBandListNR-SIB-v1760              OPTIONAL,       -- Need R
            frequencyBandListSUL-v1760          MultiFrequencyBandListNR-SIB-v1760              OPTIONAL        -- Need R
        ]],
        [[
            frequencyBandListAerial-r18         MultiFrequencyBandListNR-Aerial-SIB-r18         OPTIONAL        -- Need S
        ]],
        [[
            refLocMapList-r19                   SEQUENCE (SIZE (1..7)) OF RefLocMap-r19         OPTIONAL,        -- Need S
            smtc5list-r19                       SEQUENCE (SIZE (1..6)) OF SSB-MTC5-r19          OPTIONAL         -- Need R
        ]]
    },
    ...,
    [[
        relaxedMeasurement-r16              SEQUENCE {
            lowMobilityEvaluation-r16           SEQUENCE {
                s-SearchDeltaP-r16                  ENUMERATED {
                    dB3, dB6, dB9, dB12, dB15,
                    spare3, spare2, spare1},
                t-SearchDeltaP-r16                  ENUMERATED {
                    s5, s10, s20, s30, s60, s120, s180,
                    s240, s300, spare7, spare6, spare5,
                    spare4, spare3, spare2, spare1}
            }                                                                                   OPTIONAL,       -- Need R
            cellEdgeEvaluation-r16              SEQUENCE {
                s-SearchThresholdP-r16              ReselectionThreshold,
                s-SearchThresholdQ-r16              ReselectionThresholdQ                       OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Need R
            combineRelaxedMeasCondition-r16     ENUMERATED {true}                               OPTIONAL,       -- Need R
            highPriorityMeasRelax-r16           ENUMERATED {true}                               OPTIONAL        -- Need R
        }                                                                                       OPTIONAL        -- Need R
    ]],
    [[
        cellEquivalentSize-r17                  INTEGER(2..16)                                  OPTIONAL,       -- Cond HSDN
        relaxedMeasurement-r17                  SEQUENCE {
            stationaryMobilityEvaluation-r17        SEQUENCE {
                s-SearchDeltaP-Stationary-r17           ENUMERATED {dB2, dB3, dB6, dB9, dB12, dB15, spare2, spare1},
                t-SearchDeltaP-Stationary-r17           ENUMERATED {s5, s10, s20, s30, s60, s120, s180, s240, s300, spare7, spare6, spare5,
                    spare4, spare3, spare2, spare1}
            },
            cellEdgeEvaluationWhileStationary-r17   SEQUENCE {
                s-SearchThresholdP2-r17                 ReselectionThreshold,
                s-SearchThresholdQ2-r17                 ReselectionThresholdQ                   OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Need R
            combineRelaxedMeasCondition2-r17        ENUMERATED {true}                           OPTIONAL        -- Need R
        }                                                                                       OPTIONAL        -- Need R
    ]],
    [[
        uav-PrioritizedFrequency-r19                ENUMERATED {true}                           OPTIONAL,       -- Need R
        uav-PrioritizedFrequencyAltitudeRange-r19   SEQUENCE {
            altitudeMin-r19                             Altitude-r18                            OPTIONAL,       -- Need S
            altitudeMax-r19                             Altitude-r18                            OPTIONAL,       -- Need S
            altitudeHyst-r19                            HysteresisAltitude-r18                  OPTIONAL        -- Need R
        }                                                                                       OPTIONAL,       -- Need R
        ssb-ToMeasureAltitudeBasedList-r19          SSB-ToMeasureAltitudeBasedList-r18          OPTIONAL,       -- Need R
        relaxedMeasurementForServingAndNeighboringCell-r19 SEQUENCE {
            cellEdgeEvaluationOnMR-ForLR-OnSSB-r19      SEQUENCE {
                s-SearchThresholdP3-r19                     ReselectionThreshold,
                s-SearchThresholdQ3-r19                     ReselectionThresholdQ               OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Cond SupportLR-OnSSB
            cellEdgeEvaluationOnMR-ForLR-OnLPSS-r19     SEQUENCE {
                s-SearchThresholdP4-r19                     ReselectionThreshold,
                s-SearchThresholdQ4-r19                     ReselectionThresholdQ               OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Cond SupportLR-OnLPSS
            cellEdgeEvaluationOnLR-ForLR-OnLPSS-r19     SEQUENCE {
                rsrpThresholdLR-r19                         ThresholdP-LR-r19,
                rsrqThresholdLR-r19                         ThresholdQ-LR-r19                   OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Need R
            cellEdgeEvaluationOnLR-ForLR-OnSSB-r19      SEQUENCE {
                rsrpThresholdLR2-r19                        ThresholdP-LR-r19,
                rsrqThresholdLR2-r19                        ThresholdQ-LR-r19                   OPTIONAL        -- Need R
            }                                                                                   OPTIONAL        -- Need R
        }                                                                                       OPTIONAL,       -- Need R
        offloadMeasurementForServingCell-r19        SEQUENCE {
            cellEdgeEvaluationOnMR-ForLR-OnSSB-r19      SEQUENCE {
                s-SearchThresholdP5-r19                     ReselectionThreshold,
                s-SearchThresholdQ5-r19                     ReselectionThresholdQ               OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Cond SupportLR-OnSSB
            cellEdgeEvaluationOnMR-ForLR-OnLPSS-r19 SEQUENCE {
                s-SearchThresholdP6-r19                 ReselectionThreshold,
                s-SearchThresholdQ6-r19                 ReselectionThresholdQ                   OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Cond SupportLR-OnLPSS
            cellEdgeEvaluationOnLR-ForLR-OnLPSS-r19 SEQUENCE {
                rsrpThresholdLR3-r19                    ThresholdP-LR-r19,
                rsrqThresholdLR3-r19                    ThresholdQ-LR-r19                       OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Need R
            cellEdgeEvaluationOnLR-ForLR-OnSSB-r19  SEQUENCE {
                rsrpThresholdLR4-r19                    ThresholdP-LR-r19,
                rsrqThresholdLR4-r19                    ThresholdQ-LR-r19                       OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Need R
            cellEdgeEvaluationOnLR-ForLR-OnLPSS-Exit-r19  SEQUENCE {
                rsrpThresholdLR5-r19                    ThresholdP-LR-r19,
                rsrqThresholdLR5-r19                    ThresholdQ-LR-r19                       OPTIONAL        -- Need R
            }                                                                                   OPTIONAL,       -- Cond SupportLR-OnLPSS
            cellEdgeEvaluationOnLR-ForLR-OnSSB-Exit-r19  SEQUENCE {
                rsrpThresholdLR6-r19                    ThresholdP-LR-r19,
                rsrqThresholdLR6-r19                    ThresholdQ-LR-r19                       OPTIONAL        -- Need R
            }                                                                                   OPTIONAL        -- Cond SupportLR-OnSSB
        }                                                                                       OPTIONAL        -- Need R
    ]],
    [[
        dummy                                     SEQUENCE {
            s-SearchDeltaP-LPWUS-r19                  ENUMERATED {dB3, dB6, dB9, dB12, dB15, spare3, spare2, spare1},
            t-SearchDeltaP-LPWUS-r19                  ENUMERATED {s1, s2, s3, s4, s5, s6, s7, s10, s20, s30, s60, s120, s180, s240, s300, spare1},
            rsrp-Threshold2onMR-ForLR-OnSSB-r19       ReselectionThreshold                    OPTIONAL,       -- Cond SupportLR-OnSSB
            rsrp-Threshold2onLR-ForLR-OnSSB-r19       ThresholdP-LR-r19,
            rsrp-Threshold2onMR-ForLR-OnLPSS-r19      ReselectionThreshold                    OPTIONAL,       -- Cond SupportLR-OnLPSS
            rsrp-Threshold2onLR-ForLR-OnLPSS-r19      ThresholdP-LR-r19
        }                                                                                     OPTIONAL        -- Need R
    ]],
    [[
        lowMobilityEvaluationLPWUS-r19            SEQUENCE {
            s-SearchDeltaP-LPWUS-r19                  ENUMERATED {dB3, dB6, dB9, dB12, dB15, spare3, spare2, spare1},
            t-SearchDeltaP-LPWUS-r19                  ENUMERATED {s1, s2, s3, s4, s5, s6, s7, s10, s20, s30, s60, s120, s180, s240, s300, spare1},
            rsrp-Threshold2onMR-ForLR-OnSSB-r19       ReselectionThreshold                    OPTIONAL,       -- Cond SupportLR-OnSSB
            rsrp-Threshold2onLR-ForLR-OnSSB-r19       ThresholdP-LR-r19                       OPTIONAL,       -- Need R
            rsrp-Threshold2onMR-ForLR-OnLPSS-r19      ReselectionThreshold                    OPTIONAL,       -- Cond SupportLR-OnLPSS
            rsrp-Threshold2onLR-ForLR-OnLPSS-r19      ThresholdP-LR-r19                       OPTIONAL        -- Need R
        }                                                                                     OPTIONAL        -- Need R
    ]]
}

Candidate change requests of v19.4.0

The CRs whose title or cover names this change, strong and likely matches only.

Fields (113)

FieldDescription
cellReselectionInfoCommon
SEQUENCE {
Cell re-selection information common for intra-frequency, inter-frequency and/ or inter-RAT cell re-selection.
nrofSS-BlocksToAverage
INTEGER (2..maxNrofSS-BlocksToAverage) · OPTIONAL Need S
Number of SS blocks to average for cell measurement derivation. If the field is absent the UE uses the measurement quantity as specified in TS 38.304 [20].
absThreshSS-BlocksConsolidation
ThresholdNR · OPTIONAL Need S
Threshold for consolidation of L1 measurements per RS index. If the field is absent, the UE uses the measurement quantity as specified in TS 38.304 [20].
rangeToBestCell
RangeToBestCell · OPTIONAL Need R
Parameter "rangeToBestCell" in TS 38.304 [20]. The network configures only non-negative (in dB) values.
q-Hyst
ENUMERATED { dB0, dB1, dB2, dB3, dB4, dB5, dB6, dB8, dB10, dB12, dB14, dB16, dB18, dB20, dB22, dB24}
Parameter " Q hyst " in TS 38.304 [20], Value in dB. Value dB1 corresponds to 1 dB, dB2 corresponds to 2 dB and so on.
speedStateReselectionPars
SEQUENCE { · OPTIONAL Need R
mobilityStateParameters
MobilityStateParameters
q-HystSF
SEQUENCE {
Parameter "Speed dependent ScalingFactor for Qhyst" in TS 38.304 [20]. The sf-Medium and sf-High concern the additional hysteresis to be applied, in Medium and High Mobility state respectively, to Qhyst as defined in TS 38.304 [20]. In dB. Value dB-6 corresponds to -6dB, dB-4 corresponds to -4dB and so on.
sf-Medium
ENUMERATED {dB-6, dB-4, dB-2, dB0}
sf-High
ENUMERATED {dB-6, dB-4, dB-2, dB0}
cellReselectionServingFreqInfo
SEQUENCE {
Information common for non-intra-frequency cell re-selection i.e. cell re-selection to inter-frequency and inter-RAT cells.
s-NonIntraSearchP
ReselectionThreshold · OPTIONAL Need S
Parameter "S nonIntraSearchP " in TS 38.304 [20]. If this field is absent, the UE applies the (default) value of infinity for S nonIntraSearchP .
s-NonIntraSearchQ
ReselectionThresholdQ · OPTIONAL Need S
Parameter "S nonIntraSearchQ " in TS 38.304 [20]. If the field is absent, the UE applies the (default) value of 0 dB for S nonIntraSearchQ .
threshServingLowP
ReselectionThreshold
Parameter "Thresh Serving, LowP " in TS 38.304 [20].
threshServingLowQ
ReselectionThresholdQ · OPTIONAL Need R
Parameter "Thresh Serving, LowQ " in TS 38.304 [20].
cellReselectionPriority
CellReselectionPriority
cellReselectionSubPriority
CellReselectionSubPriority · OPTIONAL Need R
od-SIB1-CellReselectionPriority-r19
CellReselectionPriority · OPTIONAL Need R
since v19.2.0
Cell reselection priorities to be considered by a UE supporting OD-SIB1 instead of cellReselectionPriority , cellReselectionSubPriority as specified in TS 38.304 [20].
od-SIB1-CellReselectionSubPriority-r19
CellReselectionSubPriority · OPTIONAL Need R
since v19.2.0
Cell reselection priorities to be considered by a UE supporting OD-SIB1 instead of cellReselectionPriority , cellReselectionSubPriority as specified in TS 38.304 [20].
intraFreqCellReselectionInfo
SEQUENCE {
Cell re-selection information common for intra-frequency cells.
q-RxLevMin
Q-RxLevMin
Parameter "Q rxlevmin " in TS 38.304 [20], applicable for intra-frequency neighbour cells.
q-RxLevMinSUL
Q-RxLevMin · OPTIONAL Need R
Parameter "Q rxlevmin " in TS 38.304 [20], applicable for intra-frequency neighbour cells.
q-QualMin
Q-QualMin · OPTIONAL Need S
Parameter "Q qualmin " in TS 38.304 [20], applicable for intra-frequency neighbour cells. If the field is absent, the UE applies the (default) value of negative infinity for Q qualmin .
s-IntraSearchP
ReselectionThreshold
Parameter "S IntraSearchP " in TS 38.304 [20].
s-IntraSearchQ
ReselectionThresholdQ · OPTIONAL Need S
Parameter "S IntraSearchQ " in TS 38.304 [20]. If the field is absent, the UE applies the (default) value of 0 dB for S IntraSearchQ .
t-ReselectionNR
T-Reselection
Parameter "Treselection NR " in TS 38.304 [20].
frequencyBandList
MultiFrequencyBandListNR-SIB · OPTIONAL Need S
Indicates the list of frequency bands for which the NR cell reselection parameters apply. The UE behaviour in case the field is absent is described in clause 5.2.2.4.3.
frequencyBandListSUL
MultiFrequencyBandListNR-SIB · OPTIONAL Need R
p-Max
P-Max · OPTIONAL Need S
Value in dBm applicable for the intra-frequency neighbouring NR cells. If absent the UE applies the maximum power according to TS 38.101-1 [15] in case of an FR1 cell, TS 38.101-2 [39] in case of an FR2 cell or TS 38.101-5 [75] in case of an NTN cell. In this release of the specification, if p-Max is present on a carrier frequency in FR2, the UE shall ignore the field and applies the maximum power according to TS 38.101-2 [39] for FR2-1/2 or according to TS 38.101-5 [75] for FR2-NTN. This field is ignored by IAB-MT and NCR-MT. The IAB-MT applies output power and emissions requirements, as specified in TS 38.174 [63]. The NCR-MT applies output power and emissions requirements as specified in TS 38.106 [79].
smtc
SSB-MTC · OPTIONAL Need S
Measurement timing configuration for intra-frequency measurement. If this field is absent, the UE assumes that SSB periodicity is 5 ms for the intra-frequency cells. If the field is broadcast by an NTN cell, the offset (derived from parameter periodicityAndOffset ) is based on the assumption that the gNB-UE propagation delay difference between the serving cell and neighbour cells equals to 0 ms, and UE can adjust the actual offset based on the actual propagation delay difference.
ss-RSSI-Measurement
SS-RSSI-Measurement · OPTIONAL Need R
ssb-ToMeasure
SSB-ToMeasure · OPTIONAL Need S
The set of SS blocks to be measured within the SMTC measurement duration (see TS 38.215 [9]). When the field is absent the UE measures on all SS-blocks.
deriveSSB-IndexFromCell
BOOLEAN
This field indicates whether the UE can utilize serving cell timing to derive the index of SS block transmitted by neighbour cell. If this field is set to true , the UE assumes SFN and frame boundary alignment across cells on the serving frequency as specified in TS 38.133 [14].
t-ReselectionNR-SF
SpeedStateScaleFactors · OPTIONAL Need R
since v15.4.0
Parameter "Speed dependent ScalingFactor for Treselection NR " in TS 38.304 [20]. If the field is absent, the UE behaviour is specified in TS 38.304 [20].
smtc2-LP-r16
SSB-MTC2-LP-r16 · OPTIONAL Need R
since v16.0.0
Measurement timing configuration for intra-frequency neighbour cells with a Long Periodicity (LP) indicated by periodicity in smtc2-LP . The timing offset and duration are equal to the offset and duration indicated in smtc in intraFreqCellReselectionInfo . The periodicity in smtc2-LP can only be set to a value strictly larger than the periodicity in smtc in intraFreqCellReselectionInfo (e.g. if smtc indicates sf20 the Long Periodicity can only be set to sf40, sf80 or sf160, if smtc indicates sf160, smtc2-LP cannot be configured). The pci-List , if present, includes the physical cell identities of the intra-frequency neighbour cells with Long Periodicity. If smtc2-LP is absent, the UE assumes that there are no intra-frequency neighbour cells with a Long Periodicity. This field is not configured together with smtc4list .
ssb-PositionQCL-Common-r16
SSB-PositionQCL-Relation-r16 · OPTIONAL Cond SharedSpectrum
since v16.0.0
Indicates the QCL relation between SS/PBCH blocks for intra-frequency neighbor cells as specified in TS 38.213 [13], clause 4.1.
ssb-PositionQCL-Common-r17
SSB-PositionQCL-Relation-r17 · OPTIONAL Cond SharedSpectrum2
since v17.1.0
Indicates the QCL relation between SS/PBCH blocks for intra-frequency neighbor cells as specified in TS 38.213 [13], clause 4.1.
smtc4list-r17
SSB-MTC4List-r17 · OPTIONAL Need R
since v17.2.0
Measurement timing configuration list for NTN deployments. The offset of each SSB-MTC4 in smtc4list and SSB-MTC5 in smtc5list is based on the assumption that the gNB-UE propagation delay difference between the serving cell and neighbour cells equals to 0 ms, and UE can adjust the actual offset based on the actual propagation delay difference. For a UE that supports less SMTCs than what is included in smtc4list and smtc5list , it is up to the UE to select which SMTCs to consider, for which the UE may use location information in refLocMapList and refLocList in SIB19 , if present. The network includes SMTC offsets in smtc5list only for (quasi-)Earth fixed cells. The total number of configurable SMTC offsets across smtc4list and smtc5list does not exceed 6. The total number of different SMTC periodicities across smtc and smtc5list does not exceed 2. If the UE supports location-based SMTC selection or twoSMTC-PeriodicitiesIntraFreq-r19 , it applies only the SMTCs configured through smtc and smtc5list (with reusing the values from smtc4list ), if present. If an entry in smtc5list is present but the pci-List and/or offset fields are absent, the UE applies the value of the corresponding field from the entry at the same position in smtc4list . If the periodicity field for an entry in smtc5list is present and the UE supports twoSMTC-PeriodicitiesIntraFreq-r19 , the UE applies the periodicity value in smtc5list , otherwise the UE applies the corresponding value in smtc .
frequencyBandList-v1760
MultiFrequencyBandListNR-SIB-v1760 · OPTIONAL Need R
since v17.6.0
Indicates the list of frequency bands for which the NR cell reselection parameters apply. The UE behaviour in case the field is absent is described in clause 5.2.2.4.3.
frequencyBandListSUL-v1760
MultiFrequencyBandListNR-SIB-v1760 · OPTIONAL Need R
since v17.6.0
frequencyBandListAerial-r18
MultiFrequencyBandListNR-Aerial-SIB-r18 · OPTIONAL Need S
since v18.0.0
Indicates the list of frequency bands for aerial operation for which the NR cell reselection parameters apply. The UE behaviour in case the field is absent is described in clause 5.2.2.4.3.
refLocMapList-r19
SEQUENCE (SIZE (1..7)) OF RefLocMap-r19 · OPTIONAL Need S
since v19.1.0
Index of the entry in refLocList in SIB19 which is associated to an SMTC configuration in smtc and/or smtc5list in an NTN (quasi-)Earth fixed cell. If present, the first entry in this list indicates the entry in refLocList in SIB19 corresponding to smtc , the second entry indicates the entry in refLocList in SIB19 corresponding to the first entry in smtc5list , the third entry indicates the entry in refLocList in SIB19 corresponding to the second entry in smtc5list, and so on. If absent, the first entry in refLocList in SIB19 corresponds to smtc , the second entry corresponds to the first entry in smtc5list , the third entry corresponds to the second entry in smtc5list ,and so on.
smtc5list-r19
SEQUENCE (SIZE (1..6)) OF SSB-MTC5-r19 · OPTIONAL Need R
since v19.0.0
Measurement timing configuration list for NTN deployments. The offset of each SSB-MTC4 in smtc4list and SSB-MTC5 in smtc5list is based on the assumption that the gNB-UE propagation delay difference between the serving cell and neighbour cells equals to 0 ms, and UE can adjust the actual offset based on the actual propagation delay difference. For a UE that supports less SMTCs than what is included in smtc4list and smtc5list , it is up to the UE to select which SMTCs to consider, for which the UE may use location information in refLocMapList and refLocList in SIB19 , if present. The network includes SMTC offsets in smtc5list only for (quasi-)Earth fixed cells. The total number of configurable SMTC offsets across smtc4list and smtc5list does not exceed 6. The total number of different SMTC periodicities across smtc and smtc5list does not exceed 2. If the UE supports location-based SMTC selection or twoSMTC-PeriodicitiesIntraFreq-r19 , it applies only the SMTCs configured through smtc and smtc5list (with reusing the values from smtc4list ), if present. If an entry in smtc5list is present but the pci-List and/or offset fields are absent, the UE applies the value of the corresponding field from the entry at the same position in smtc4list . If the periodicity field for an entry in smtc5list is present and the UE supports twoSMTC-PeriodicitiesIntraFreq-r19 , the UE applies the periodicity value in smtc5list , otherwise the UE applies the corresponding value in smtc .
relaxedMeasurement-r16
SEQUENCE { · OPTIONAL Need R
since v16.1.0
Configuration to allow relaxation of RRM measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.9). In NTN, this field is only applicable for GSO neighbour cells.
lowMobilityEvaluation-r16
SEQUENCE { · OPTIONAL Need R
since v16.1.0
Indicates the criteria for a UE to detect low mobility, in order to relax measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.9.1).
s-SearchDeltaP-r16
ENUMERATED { dB3, dB6, dB9, dB12, dB15, spare3, spare2, spare1}
since v16.1.0
Parameter "S SearchDeltaP " in TS 38.304 [20]. Value dB3 corresponds to 3 dB, dB6 corresponds to 6 dB and so on.
t-SearchDeltaP-r16
ENUMERATED { s5, s10, s20, s30, s60, s120, s180, s240, s300, spare7, spare6, spare5, spare4, spare3, spare2, spare1}
since v16.1.0
Parameter "T SearchDeltaP " in TS 38.304 [20]. Value in seconds. Value s5 means 5 seconds, value s10 means 10 seconds and so on.
cellEdgeEvaluation-r16
SEQUENCE { · OPTIONAL Need R
since v16.1.0
Indicates the criteria for a UE to detect that it is not at cell edge, in order to relax measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.9.2).
s-SearchThresholdP-r16
ReselectionThreshold
since v16.1.0
Parameters "S SearchThresholdP ", "S SearchThresholdP2 ", "S SearchThresholdP3 ", "S SearchThresholdP4 ", "S SearchThresholdP5 ", and "S SearchThresholdP6 " in TS 38.304 [20]. The network configures s-SearchThresholdP and s-SearchThresholdP2 to be less than or equal to s-IntraSearchP and s-NonIntraSearchP . The network configures both s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-IntraSearchP and s-NonIntraSearchP , if there is such configuration(s). The network configures s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-SearchThresholdP3 and s-SearchThresholdP4 , respectively, if there is such configuration(s).
s-SearchThresholdQ-r16
ReselectionThresholdQ · OPTIONAL Need R
since v16.1.0
Parameters "S SearchThresholdQ ", "S SearchThresholdQ2 ", "S SearchThresholdQ3 ", "S SearchThresholdQ4 ", "S SearchThresholdQ5 ", and "S SearchThresholdQ6 " in TS 38.304 [20]. The network configures s-SearchThresholdQ and s-SearchThresholdQ2 to be less than or equal to s-IntraSearchQ and s-NonIntraSearchQ . The network configures both s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-IntraSearchQ and s-NonIntraSearchQ , if there is such configuration(s). The network configures s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-SearchThresholdQ3 and s-SearchThresholdQ4 , respectively, if there is such configuration(s).
combineRelaxedMeasCondition-r16
ENUMERATED {true} · OPTIONAL Need R
since v16.1.0
When both lowMobilityEvaluation and cellEdgeEvaluation criteria are present in SIB2, this parameter configures the UE to fulfil both criteria in order to relax measurement requirements for cell reselection. If the field is absent, the UE is allowed to relax measurement requirements for cell reselection when either or both of the criteria are met (see TS 38.304 [20], clause 5.2.4.9.0).
highPriorityMeasRelax-r16
ENUMERATED {true} · OPTIONAL Need R
since v16.1.0
Indicates whether measurements can be relaxed on high priority frequencies. If the field is absent, the UE shall not relax measurements on high priority frequencies beyond "T higher_priority_search " unless both low mobility and not at cell edge criteria are fulfilled (see TS 38.133 [14], clauses 4.2.2.7, 4.2.2.10 and 4.2.2.11).
cellEquivalentSize-r17
INTEGER(2..16) · OPTIONAL Cond HSDN
since v17.0.0
The number of cell count used for mobility state estimation for this cell as specified in TS 38.304 [20].
relaxedMeasurement-r17
SEQUENCE { · OPTIONAL Need R
since v17.0.0
Configuration to allow relaxation of RRM measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.9). In NTN, this field is only applicable for GSO neighbour cells.
stationaryMobilityEvaluation-r17
SEQUENCE {
since v17.0.0
Indicates the criteria for a UE to detect stationary mobility, in order to relax measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.9.0).
s-SearchDeltaP-Stationary-r17
ENUMERATED {dB2, dB3, dB6, dB9, dB12, dB15, spare2, spare1}
since v17.0.0
Parameter "S SearchDeltaP-Stationary " in TS 38.304 [20]. Value dB2 corresponds to 2 dB, dB3 corresponds to 3 dB and so on.
t-SearchDeltaP-Stationary-r17
ENUMERATED {s5, s10, s20, s30, s60, s120, s180, s240, s300, spare7, spare6, spare5, spare4, spare3, spare2, spare1}
since v17.0.0
Parameter "T SearchDeltaP-Stationary " in TS 38.304 [20]. Value in seconds. Value s5 means 5 seconds, value s10 means 10 seconds and so on.
cellEdgeEvaluationWhileStationary-r17
SEQUENCE { · OPTIONAL Need R
since v17.0.0
Indicates the criteria for a UE to detect that it is not at cell edge while stationary, in order to relax measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.9.4).
s-SearchThresholdP2-r17
ReselectionThreshold
since v17.0.0
Parameters "S SearchThresholdP ", "S SearchThresholdP2 ", "S SearchThresholdP3 ", "S SearchThresholdP4 ", "S SearchThresholdP5 ", and "S SearchThresholdP6 " in TS 38.304 [20]. The network configures s-SearchThresholdP and s-SearchThresholdP2 to be less than or equal to s-IntraSearchP and s-NonIntraSearchP . The network configures both s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-IntraSearchP and s-NonIntraSearchP , if there is such configuration(s). The network configures s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-SearchThresholdP3 and s-SearchThresholdP4 , respectively, if there is such configuration(s).
s-SearchThresholdQ2-r17
ReselectionThresholdQ · OPTIONAL Need R
since v17.0.0
Parameters "S SearchThresholdQ ", "S SearchThresholdQ2 ", "S SearchThresholdQ3 ", "S SearchThresholdQ4 ", "S SearchThresholdQ5 ", and "S SearchThresholdQ6 " in TS 38.304 [20]. The network configures s-SearchThresholdQ and s-SearchThresholdQ2 to be less than or equal to s-IntraSearchQ and s-NonIntraSearchQ . The network configures both s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-IntraSearchQ and s-NonIntraSearchQ , if there is such configuration(s). The network configures s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-SearchThresholdQ3 and s-SearchThresholdQ4 , respectively, if there is such configuration(s).
combineRelaxedMeasCondition2-r17
ENUMERATED {true} · OPTIONAL Need R
since v17.0.0
When both stationaryMobilityEvaluation and cellEdgeEvaluationWhileStationary criteria are present in SIB2, this parameter configures the UE to fulfil both criteria in order to relax measurement requirements for cell reselection. If the field is absent, the UE is allowed to relax measurement requirements for cell reselection when only the stationary criteria is met (see TS 38.304 [20], clause 5.2.4.9.0).
uav-PrioritizedFrequency-r19
ENUMERATED {true} · OPTIONAL Need R
since v19.0.0
This field indicates this is a frequency prioritized by Aerial UE for cell reselection as specified in TS 38.304 [20]
uav-PrioritizedFrequencyAltitudeRange-r19
SEQUENCE { · OPTIONAL Need R
since v19.0.0
Indicates the altitude range where the configuration of uav-PrioritizedFrequency is valid. If absent, the uav-PrioritizedFrequency flag (if included), applies for all altitudes. For this altitude range, altitudeMin indicates the minimum altitude in meters relative to sea level, altitudeMax indicates the maximum altitude in meters relative to sea level, and if included, altitudeHyst indicates hysteresis in meters for determination of the altitude range. I.e., when altitudeHyst is configured for an altitude range, the UE considers itself to have entered the range if altitudeMin ≤ UE altitude ≤ altitudeMax and after entering the range considers itself to be in the range while ( altitudeMin – altitudeHyst ) ≤ UE altitude ≤ ( altitudeMax + altitudeHyst ). For this altitude range, if altitudeMin is absent, value minAltitude-r18 is used and if altitudeMax is absent, value maxAltitude-r18 is used.
altitudeMin-r19
Altitude-r18 · OPTIONAL Need S
since v19.0.0
altitudeMax-r19
Altitude-r18 · OPTIONAL Need S
since v19.0.0
altitudeHyst-r19
HysteresisAltitude-r18 · OPTIONAL Need R
since v19.0.0
ssb-ToMeasureAltitudeBasedList-r19
SSB-ToMeasureAltitudeBasedList-r18 · OPTIONAL Need R
since v19.0.0
List of altitude-dependent ssb-ToMeasure . The UE behaviour is specified in TS 38.304 [20]. For each altitude range, altitudeMin indicates the minimum altitude in meters relative to sea level, altitudeMax indicates the maximum altitude in meters relative to sea level, and if included, altitudeHyst indicates hysteresis in meters for determination of the altitude range. I.e., when altitudeHyst is configured for an altitude range, the UE considers itself to have entered the range if altitudeMin ≤ UE altitude ≤ a ltitudeMax and after entering the range considers itself to be in the range while ( altitudeMin – altitudeHyst ) ≤ UE altitude ≤ ( altitudeMax + altitudeHyst ). For each altitudeRange , if altitudeMin is absent, value minAltitude-r18 is used and if altitudeMax is absent, value maxAltitude-r18 is used.
relaxedMeasurementForServingAndNeighboringCell-r19
SEQUENCE { · OPTIONAL Need R
since v19.0.0
Configuration to allow relaxation of serving cell and neighboring cell RRM measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12).
cellEdgeEvaluationOnMR-ForLR-OnSSB-r19
SEQUENCE { · OPTIONAL Cond SupportLR-OnSSB
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on main radio for OFDM based LP-WUR measuring on SSB, in order to relax serving cell cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
s-SearchThresholdP3-r19
ReselectionThreshold
since v19.0.0
Parameters "S SearchThresholdP ", "S SearchThresholdP2 ", "S SearchThresholdP3 ", "S SearchThresholdP4 ", "S SearchThresholdP5 ", and "S SearchThresholdP6 " in TS 38.304 [20]. The network configures s-SearchThresholdP and s-SearchThresholdP2 to be less than or equal to s-IntraSearchP and s-NonIntraSearchP . The network configures both s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-IntraSearchP and s-NonIntraSearchP , if there is such configuration(s). The network configures s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-SearchThresholdP3 and s-SearchThresholdP4 , respectively, if there is such configuration(s).
s-SearchThresholdQ3-r19
ReselectionThresholdQ · OPTIONAL Need R
since v19.0.0
Parameters "S SearchThresholdQ ", "S SearchThresholdQ2 ", "S SearchThresholdQ3 ", "S SearchThresholdQ4 ", "S SearchThresholdQ5 ", and "S SearchThresholdQ6 " in TS 38.304 [20]. The network configures s-SearchThresholdQ and s-SearchThresholdQ2 to be less than or equal to s-IntraSearchQ and s-NonIntraSearchQ . The network configures both s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-IntraSearchQ and s-NonIntraSearchQ , if there is such configuration(s). The network configures s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-SearchThresholdQ3 and s-SearchThresholdQ4 , respectively, if there is such configuration(s).
cellEdgeEvaluationOnMR-ForLR-OnLPSS-r19
SEQUENCE { · OPTIONAL Cond SupportLR-OnLPSS
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on main radio for OOK based LP-WUR or OFDM based LP-WUR measuring on LP-SS, in order to relax serving cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
s-SearchThresholdP4-r19
ReselectionThreshold
since v19.0.0
Parameters "S SearchThresholdP ", "S SearchThresholdP2 ", "S SearchThresholdP3 ", "S SearchThresholdP4 ", "S SearchThresholdP5 ", and "S SearchThresholdP6 " in TS 38.304 [20]. The network configures s-SearchThresholdP and s-SearchThresholdP2 to be less than or equal to s-IntraSearchP and s-NonIntraSearchP . The network configures both s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-IntraSearchP and s-NonIntraSearchP , if there is such configuration(s). The network configures s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-SearchThresholdP3 and s-SearchThresholdP4 , respectively, if there is such configuration(s).
s-SearchThresholdQ4-r19
ReselectionThresholdQ · OPTIONAL Need R
since v19.0.0
Parameters "S SearchThresholdQ ", "S SearchThresholdQ2 ", "S SearchThresholdQ3 ", "S SearchThresholdQ4 ", "S SearchThresholdQ5 ", and "S SearchThresholdQ6 " in TS 38.304 [20]. The network configures s-SearchThresholdQ and s-SearchThresholdQ2 to be less than or equal to s-IntraSearchQ and s-NonIntraSearchQ . The network configures both s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-IntraSearchQ and s-NonIntraSearchQ , if there is such configuration(s). The network configures s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-SearchThresholdQ3 and s-SearchThresholdQ4 , respectively, if there is such configuration(s).
cellEdgeEvaluationOnLR-ForLR-OnLPSS-r19
SEQUENCE { · OPTIONAL Need R
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on LR for OOK based LP-WUR or OFDM based LP-WUR measuring on LP-SS, in order to relax serving cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
rsrpThresholdLR-r19
ThresholdP-LR-r19
since v19.0.0
Parameters " S RSRPThresholdLR ", " S RSRPThresholdLR2 ", " S RSRPThresholdLR3 ", " S RSRPThresholdLR4 ", " S RSRPThresholdLR5 ", and " S RSRPThresholdLR6 " in TS 38.304 [20]. The network configures rsrpThresholdLR3 and rsrpThresholdLR4 to be larger than or equal to rsrpThresholdLR and rsrpThresholdLR2, respectively, if there is such configuration(s).
rsrqThresholdLR-r19
ThresholdQ-LR-r19 · OPTIONAL Need R
since v19.0.0
Parameters " S RSRQThresholdLR ", " S RSRQThresholdLR2 ", " S RSRQThresholdLR3 ", " S RSRQThresholdLR4 ", " S RSRQThresholdLR5 ", and " S RSRQThresholdLR6 " in TS 38.304 [20]. The network configures rsrqThresholdLR3 and rsrqThresholdLR4 to be larger than or equal to rsrqThresholdLR and rsrqThresholdLR2, respectively, if there is such configuration(s).
cellEdgeEvaluationOnLR-ForLR-OnSSB-r19
SEQUENCE { · OPTIONAL Need R
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on LR for OFDM based LP-WUR measuring on SSB, in order to relax serving cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
rsrpThresholdLR2-r19
ThresholdP-LR-r19
since v19.0.0
Parameters " S RSRPThresholdLR ", " S RSRPThresholdLR2 ", " S RSRPThresholdLR3 ", " S RSRPThresholdLR4 ", " S RSRPThresholdLR5 ", and " S RSRPThresholdLR6 " in TS 38.304 [20]. The network configures rsrpThresholdLR3 and rsrpThresholdLR4 to be larger than or equal to rsrpThresholdLR and rsrpThresholdLR2, respectively, if there is such configuration(s).
rsrqThresholdLR2-r19
ThresholdQ-LR-r19 · OPTIONAL Need R
since v19.0.0
Parameters " S RSRQThresholdLR ", " S RSRQThresholdLR2 ", " S RSRQThresholdLR3 ", " S RSRQThresholdLR4 ", " S RSRQThresholdLR5 ", and " S RSRQThresholdLR6 " in TS 38.304 [20]. The network configures rsrqThresholdLR3 and rsrqThresholdLR4 to be larger than or equal to rsrqThresholdLR and rsrqThresholdLR2, respectively, if there is such configuration(s).
offloadMeasurementForServingCell-r19
SEQUENCE { · OPTIONAL Need R
since v19.0.0
Configuration to allow offloading of serving cell RRM measurement on MR to serving cell RRM measurement on LP-WUR (see TS 38.304 [20], clause 5.2.4.12).
cellEdgeEvaluationOnMR-ForLR-OnSSB-r19
SEQUENCE { · OPTIONAL Cond SupportLR-OnSSB
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on main radio for OFDM based LP-WUR measuring on SSB, in order to relax serving cell cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
s-SearchThresholdP5-r19
ReselectionThreshold
since v19.0.0
Parameters "S SearchThresholdP ", "S SearchThresholdP2 ", "S SearchThresholdP3 ", "S SearchThresholdP4 ", "S SearchThresholdP5 ", and "S SearchThresholdP6 " in TS 38.304 [20]. The network configures s-SearchThresholdP and s-SearchThresholdP2 to be less than or equal to s-IntraSearchP and s-NonIntraSearchP . The network configures both s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-IntraSearchP and s-NonIntraSearchP , if there is such configuration(s). The network configures s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-SearchThresholdP3 and s-SearchThresholdP4 , respectively, if there is such configuration(s).
s-SearchThresholdQ5-r19
ReselectionThresholdQ · OPTIONAL Need R
since v19.0.0
Parameters "S SearchThresholdQ ", "S SearchThresholdQ2 ", "S SearchThresholdQ3 ", "S SearchThresholdQ4 ", "S SearchThresholdQ5 ", and "S SearchThresholdQ6 " in TS 38.304 [20]. The network configures s-SearchThresholdQ and s-SearchThresholdQ2 to be less than or equal to s-IntraSearchQ and s-NonIntraSearchQ . The network configures both s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-IntraSearchQ and s-NonIntraSearchQ , if there is such configuration(s). The network configures s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-SearchThresholdQ3 and s-SearchThresholdQ4 , respectively, if there is such configuration(s).
cellEdgeEvaluationOnMR-ForLR-OnLPSS-r19
SEQUENCE { · OPTIONAL Cond SupportLR-OnLPSS
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on main radio for OOK based LP-WUR or OFDM based LP-WUR measuring on LP-SS, in order to relax serving cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
s-SearchThresholdP6-r19
ReselectionThreshold
since v19.0.0
Parameters "S SearchThresholdP ", "S SearchThresholdP2 ", "S SearchThresholdP3 ", "S SearchThresholdP4 ", "S SearchThresholdP5 ", and "S SearchThresholdP6 " in TS 38.304 [20]. The network configures s-SearchThresholdP and s-SearchThresholdP2 to be less than or equal to s-IntraSearchP and s-NonIntraSearchP . The network configures both s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-IntraSearchP and s-NonIntraSearchP , if there is such configuration(s). The network configures s-SearchThresholdP5 and s-SearchThresholdP6 to be larger than or equal to s-SearchThresholdP3 and s-SearchThresholdP4 , respectively, if there is such configuration(s).
s-SearchThresholdQ6-r19
ReselectionThresholdQ · OPTIONAL Need R
since v19.0.0
Parameters "S SearchThresholdQ ", "S SearchThresholdQ2 ", "S SearchThresholdQ3 ", "S SearchThresholdQ4 ", "S SearchThresholdQ5 ", and "S SearchThresholdQ6 " in TS 38.304 [20]. The network configures s-SearchThresholdQ and s-SearchThresholdQ2 to be less than or equal to s-IntraSearchQ and s-NonIntraSearchQ . The network configures both s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-IntraSearchQ and s-NonIntraSearchQ , if there is such configuration(s). The network configures s-SearchThresholdQ5 and s-SearchThresholdQ6 to be larger than or equal to s-SearchThresholdQ3 and s-SearchThresholdQ4 , respectively, if there is such configuration(s).
cellEdgeEvaluationOnLR-ForLR-OnLPSS-r19
SEQUENCE { · OPTIONAL Need R
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on LR for OOK based LP-WUR or OFDM based LP-WUR measuring on LP-SS, in order to relax serving cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
rsrpThresholdLR3-r19
ThresholdP-LR-r19
since v19.0.0
Parameters " S RSRPThresholdLR ", " S RSRPThresholdLR2 ", " S RSRPThresholdLR3 ", " S RSRPThresholdLR4 ", " S RSRPThresholdLR5 ", and " S RSRPThresholdLR6 " in TS 38.304 [20]. The network configures rsrpThresholdLR3 and rsrpThresholdLR4 to be larger than or equal to rsrpThresholdLR and rsrpThresholdLR2, respectively, if there is such configuration(s).
rsrqThresholdLR3-r19
ThresholdQ-LR-r19 · OPTIONAL Need R
since v19.0.0
cellEdgeEvaluationOnLR-ForLR-OnSSB-r19
SEQUENCE { · OPTIONAL Need R
since v19.0.0
Indicates the criteria for a UE to detect that it is not at cell edge based on the serving cell measurement on LR for OFDM based LP-WUR measuring on SSB, in order to relax serving cell and neighboring cell measurement requirements for cell reselection (see TS 38.304 [20], clause 5.2.4.12.2), or to offload serving cell measurement to LP-WUR (see TS 38.304 [20], clause 5.2.4.12.4).
rsrpThresholdLR4-r19
ThresholdP-LR-r19
since v19.0.0
Parameters " S RSRPThresholdLR ", " S RSRPThresholdLR2 ", " S RSRPThresholdLR3 ", " S RSRPThresholdLR4 ", " S RSRPThresholdLR5 ", and " S RSRPThresholdLR6 " in TS 38.304 [20]. The network configures rsrpThresholdLR3 and rsrpThresholdLR4 to be larger than or equal to rsrpThresholdLR and rsrpThresholdLR2, respectively, if there is such configuration(s).
rsrqThresholdLR4-r19
ThresholdQ-LR-r19 · OPTIONAL Need R
since v19.0.0
Parameters " S RSRQThresholdLR ", " S RSRQThresholdLR2 ", " S RSRQThresholdLR3 ", " S RSRQThresholdLR4 ", " S RSRQThresholdLR5 ", and " S RSRQThresholdLR6 " in TS 38.304 [20]. The network configures rsrqThresholdLR3 and rsrqThresholdLR4 to be larger than or equal to rsrqThresholdLR and rsrqThresholdLR2, respectively, if there is such configuration(s).
cellEdgeEvaluationOnLR-ForLR-OnLPSS-Exit-r19
SEQUENCE { · OPTIONAL Cond SupportLR-OnLPSS
since v19.0.0
Indicates the exit criteria for serving cell measurement offloading for a UE to detect that it is not at cell edge based on the serving cell measurement on LR for OOK based LP-WUR or OFDM based LP-WUR measuring on LP-SS. This field is optional present for the cell supporting OOK based LP-WUR or OFDM based LP-WUR measuring on LP-SS.
rsrpThresholdLR5-r19
ThresholdP-LR-r19
since v19.0.0
Parameters " S RSRPThresholdLR ", " S RSRPThresholdLR2 ", " S RSRPThresholdLR3 ", " S RSRPThresholdLR4 ", " S RSRPThresholdLR5 ", and " S RSRPThresholdLR6 " in TS 38.304 [20]. The network configures rsrpThresholdLR3 and rsrpThresholdLR4 to be larger than or equal to rsrpThresholdLR and rsrpThresholdLR2, respectively, if there is such configuration(s).
rsrqThresholdLR5-r19
ThresholdQ-LR-r19 · OPTIONAL Need R
since v19.0.0
Parameters " S RSRQThresholdLR ", " S RSRQThresholdLR2 ", " S RSRQThresholdLR3 ", " S RSRQThresholdLR4 ", " S RSRQThresholdLR5 ", and " S RSRQThresholdLR6 " in TS 38.304 [20]. The network configures rsrqThresholdLR3 and rsrqThresholdLR4 to be larger than or equal to rsrqThresholdLR and rsrqThresholdLR2, respectively, if there is such configuration(s).
cellEdgeEvaluationOnLR-ForLR-OnSSB-Exit-r19
SEQUENCE { · OPTIONAL Cond SupportLR-OnSSB
since v19.0.0
Indicates the exit criteria for serving cell measurement offloading for a UE to detect that it is not at cell edge based on the serving cell measurement on LR for OFDM based LP-WUR measuring on SSB.
rsrpThresholdLR6-r19
ThresholdP-LR-r19
since v19.0.0
Parameters " S RSRPThresholdLR ", " S RSRPThresholdLR2 ", " S RSRPThresholdLR3 ", " S RSRPThresholdLR4 ", " S RSRPThresholdLR5 ", and " S RSRPThresholdLR6 " in TS 38.304 [20]. The network configures rsrpThresholdLR3 and rsrpThresholdLR4 to be larger than or equal to rsrpThresholdLR and rsrpThresholdLR2, respectively, if there is such configuration(s).
rsrqThresholdLR6-r19
ThresholdQ-LR-r19 · OPTIONAL Need R
since v19.0.0
Parameters " S RSRQThresholdLR ", " S RSRQThresholdLR2 ", " S RSRQThresholdLR3 ", " S RSRQThresholdLR4 ", " S RSRQThresholdLR5 ", and " S RSRQThresholdLR6 " in TS 38.304 [20]. The network configures rsrqThresholdLR3 and rsrqThresholdLR4 to be larger than or equal to rsrqThresholdLR and rsrqThresholdLR2, respectively, if there is such configuration(s).
dummy
SEQUENCE { · OPTIONAL Need R
since v19.4.0
This field is not used in this specification. If received, it is ignored by the UE.
s-SearchDeltaP-LPWUS-r19
ENUMERATED {dB3, dB6, dB9, dB12, dB15, spare3, spare2, spare1}
since v19.4.0
Parameter "S SearchDeltaP-LPWUS " in TS 38.304 [20]. Value dB3 corresponds to 3 dB, dB6 corresponds to 6 dB and so on.
t-SearchDeltaP-LPWUS-r19
ENUMERATED {s1, s2, s3, s4, s5, s6, s7, s10, s20, s30, s60, s120, s180, s240, s300, spare1}
since v19.4.0
Parameter "T SearchDeltaP-LPWUS " in TS 38.304 [20]. Value in seconds. Value s1 means 1 second, value s2 means 2 seconds and so on.
rsrp-Threshold2onMR-ForLR-OnSSB-r19
ReselectionThreshold · OPTIONAL Cond SupportLR-OnSSB
since v19.4.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).
rsrp-Threshold2onLR-ForLR-OnSSB-r19
ThresholdP-LR-r19
since v19.4.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).
rsrp-Threshold2onMR-ForLR-OnLPSS-r19
ReselectionThreshold · OPTIONAL Cond SupportLR-OnLPSS
since v19.4.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).
rsrp-Threshold2onLR-ForLR-OnLPSS-r19
ThresholdP-LR-r19
since v19.4.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).
lowMobilityEvaluationLPWUS-r19
SEQUENCE { · OPTIONAL Need R
since v19.3.0
Indicates the criteria for a UE supporting LP-WUS to detect low mobility, in order to relax serving cell and further relax neighbouring cell RRM measurement requirements (see TS 38.304 [20], clause 5.2.4.12.5).
s-SearchDeltaP-LPWUS-r19
ENUMERATED {dB3, dB6, dB9, dB12, dB15, spare3, spare2, spare1}
since v19.3.0
Parameter "S SearchDeltaP-LPWUS " in TS 38.304 [20]. Value dB3 corresponds to 3 dB, dB6 corresponds to 6 dB and so on.
t-SearchDeltaP-LPWUS-r19
ENUMERATED {s1, s2, s3, s4, s5, s6, s7, s10, s20, s30, s60, s120, s180, s240, s300, spare1}
since v19.3.0
Parameter "T SearchDeltaP-LPWUS " in TS 38.304 [20]. Value in seconds. Value s1 means 1 second, value s2 means 2 seconds and so on.
rsrp-Threshold2onMR-ForLR-OnSSB-r19
ReselectionThreshold · OPTIONAL Cond SupportLR-OnSSB
since v19.3.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).
rsrp-Threshold2onLR-ForLR-OnSSB-r19
ThresholdP-LR-r19 · OPTIONAL Need R
since v19.3.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).
rsrp-Threshold2onMR-ForLR-OnLPSS-r19
ReselectionThreshold · OPTIONAL Cond SupportLR-OnLPSS
since v19.3.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).
rsrp-Threshold2onLR-ForLR-OnLPSS-r19
ThresholdP-LR-r19 · OPTIONAL Need R
since v19.3.0
Parameters "S LP_WUS_Threshold2P_OnMR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnLR_ForLR_OnSSB ", "S LP_WUS_Threshold2P_OnMR_ForLR_OnLPSS " and "S LP_WUS_Threshold2P_OnLR_ForLR_OnLPSS " in TS 38.304 [20]. The network configures rsrp-Threshold2onMR-ForLR-OnSSB and rsrp-Threshold2onLR-ForLR-OnSSB to be smaller than s-SearchThresholdP3 and rsrpThresholdLR2, respectively, if there is such configuration(s). The network configures rsrp-Threshold2onMR-ForLR-OnLPSS and rsrp-Threshold2onLR-ForLR-OnLPSS to be smaller than s-SearchThresholdP4 and rsrpThresholdLR, respectively, if there is such configuration(s).

Used by (1)

Uses (30)

In the viewer